SUPER MICRO Computer AS1020S-8 Boot Device Priority, Hard Disk Drives, Removable Drives

Page 85

Chapter 7: BIOS

Boot Device Priority

This feature allows the user to prioritize the sequence for the Boot Device with the devices installed in the system. The recommended settings (with generic names) are:

·1st Boot Device – Removeable drive (e.g. ﬂ oppy drive)

·2nd Boot Device – CD/DVD

·3rd Boot Device – Hard drive

·4th Boot Device – LAN

Hard Disk Drives

This feature allows the user to prioritize the Boot sequence from available hard drives.

1st Drive/2nd Drive/3rd Drive/4th Drive/5th Drive

Specify the boot sequence for the available hard drives on the system.

Removable Drives

This feature allows the user to specify the Boot sequence from available remov- able drives.

1st Drive

Speciﬁ es the boot sequence for the 1st Removable Drive.

CD/DVD Drives

This feature allows the user to specify the boot sequence from available CDROM drives.

1st Drive

Speciﬁ es the boot sequence for the 1st Hard Drive.

Onboard SCSI Host RAID

Use this setting to Enable or Disable the onboard SCSI Host RAID.

Onboard NIC PXE Option ROM

Use this setting to Enable or Disable the onboard NIC PXE option ROM.

7-15

Image 85

Contents AS1020S-8 Manual Revision Release Date December 28 About This Manual PrefaceManual Organization Advanced Serverboard Setup System SafetyAdvanced Chassis Setup BiosPreface Table of Contents HDD LED NIC1 LED NIC2 LED Advanced Serverboard SetupJsled Advanced Chassis SetupAppendices BiosPage Overview Chapter IntroductionServerboard Features Server Chassis Features Cooling System Serverworks HT-2000/1000 Chipset System Block Diagram Page Preparing for Setup Chapter Server InstallationUnpacking the System Rack Precautions Choosing a Setup LocationServer Precautions Rack Mounting Considerations Installing the Rack Rails Installing the System into a RackIdentifying the Sections of the Rails Identifying the Sections of the Rails Installing the Chassis RailsInstalling the Server into a Rack Installing the Server into the RackInstalling the Server into a Telco Rack Installing the Server into a Telco RackChecking the Serverboard Setup Accessing the drive bays Checking the Drive Bay SetupCD-ROM and ﬂoppy disk drives Check the Scsi disk drivesCheck the airﬂow Supplying power to the systemControl Panel Buttons Chapter System InterfaceControl Panel LEDs Scsi Drive Carrier LEDs Page Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsPrecautions Chapter Advanced Serverboard SetupHandling the Serverboard UnpackingInstalling the Processor install to the CPU#1 socket ﬁrst Processor and Heatsink InstallationMounting the Serverboard into a Chassis Page Installing Heatsinks Installing the HeatsinksConnecting Data Cables Connecting CablesConnecting Power Cables I/O Ports Connecting the Control PanelSupport Installing MemoryOptimizing memory performance Side and Top Views of DDR InstallationAdding PCI Cards PCI card installationPCI slots H8DSR-8 Serverboard Layout Not drawn to scale Serverboard DetailsConnectors Description Jumpers Description Default SettingH8DSR-8 Quick Reference Onboard LEDs DescriptionPrimary ATX Power Connector Connector DeﬁnitionsProcessor Power Connector Secondary Power ConnectionOverheat/Fan Fail LED Power LEDReset Button Power Fail LEDPower Button USB0/1 Universal Serial Bus PortsSerial Ports USB2/3 HeadersFan Headers ATX PS/2 Keyboard and PS/2 Mouse PortsSMB Power I2C Power LED/SpeakerJLAN1/2 Ethernet Ports Ipmb HeaderWake-On-Ring Overheat LEDWake-On-LAN Chassis IntrusionExplanation Jumpers Jumper SettingsCmos Clear PCI-X Slot Frequency Select Onboard Speaker Enable/ DisableWatch Dog Scsi Termination Enable/ Disable Scsi Controller Enable/ DisableVGA Enable/Disable Power Force OnI2C to PCI Enable/Disable Onboard Indicators+3.3V Power LED JLAN1/JLAN2 LEDsPost Code LEDs Scsi Activity LEDsFloppy, IDE and Scsi Drive Connections Floppy ConnectorIDE Connector Diffsens Termpwr Scsi ConnectorsPage Static-Sensitive Devices Chapter Advanced Chassis SetupTools Required Chassis Front and Rear Views Control PanelSystem Fans Installing a new fanSystem Fan Failure Replacing System FansAccessing the Drive Bays Drive Bay Installation/RemovalMounting a Scsi drive in a drive carrier Scsi Drive InstallationInstalling/removing hot-swap Scsi drives CD-ROM and Floppy Drive Installation Power Supply Failure Power SupplyRemoving/Replacing the Power Supply Removing the power supplyRemoving/Replacing the Power Supply Page Chapter Starting the Setup UtilityIntroduction Main Menu Advanced Settings MenuCPU Conﬁguration Sub-Menu IDE Conﬁguration A.R.T DMA ModeBit Data Transfer Hard Disk Write ProtectFloppy Conﬁguration PCI/PnP MenuSuper IO Conﬁguration North Bridge Conﬁguration Chipset MenuUser Conﬁguration Mode MCT Timing ModeEnable Clock to All DIMMs ECC Conﬁguration Dram ECC EnableECC Chip Kill Power Down ControlDram Scrub Redirect Dram BG ScrubAcpi Conﬁguration Advanced Acpi Conﬁguration ATA ConﬁgurationEvent Log Conﬁguration Hyper Transport Conﬁguration Remote Access Conﬁguration AMD PowerNow ConﬁgurationMPS Conﬁguration PCI Express ConﬁgurationSystem Health Monitor CPU Overheat TemperatureSystem Fan Monitor Fan Speed Control ModesBoot Settings Conﬁguration Boot MenuHard Disk Drives Boot Device PriorityRemovable Drives CD/DVD DrivesExit Menu Security MenuLoad Fail-Safe Defaults Load Optimal DefaultsPage Amibios Error Beep Codes Appendix a Bios Error Beep CodesBeep Code Error Message Description Page Uncompressed Initialization Codes Appendix B Bios Post Checkpoint CodesBootblock Recovery Codes Uncompressed Initialization Codes Checkpoint Appendix B Bios Post Checkpoint Codes Checkpoint A9h Aah Abh B0h B1h 00h Page Appendix C System Speciﬁcations Power Supply WeightServerboard ChassisRegulatory Compliance