SUPER MICRO Computer AS1020S-8 Scsi Controller Enable/ Disable, Scsi Termination Enable/ Disable

AS1020S-8 User's Manual

SCSI Controller Enable/ Disable

Jumper JPA1 is used to enable or dis- able the Adaptec AIC-7902W SCSI controller. The default setting is on pins 1-2 to enable SCSI. See the table on right for jumper settings.

SCSI Termination Enable/ Disable

Jumpers JPA2 and JPA3 are used to enable or disable termination for SCSI channels A and B, respectively. The default setting is open to enable termi- nation. See the table on right for pin defi nitions.

Note: In order for the SCSI drives to function properly, please do not change the default setting (enabled) set by the

manufacturer.)

VGA Enable/Disable

JPG1 allows you to enable or disable the VGA port. The default position is on pins 1 and 2 to enable VGA. See the table on the right for jumper set- tings.

Power Force On

JPF allows you to enable or disable the Power Force On function. If enabled, system power will always stay on. If disabled (the default setting), the user needs to depress the power button to power up the system.

SCSI Enable/Disable

Jumper Settings (JPA1)

Both Jumpers	Defi nition
Pins 1-2	Enabled
Pins 2-3	Disabled

SCSI Term. Enable/Disable Jumper Settings (JPA2/JPA3)

Jumper Setting	Defi nition
Open	Enabled
Closed	Disabled

VGA Enable/Disable

Jumper Settings (JPG1)

Jumper Setting	Defi nition
Pins 1-2	Enabled
Pins 2-3	Disabled

Power Force On

Jumper Settings (JPF

Jumper Setting	Defi nition
Closed	Force On
Open	Disabled

5-20