Link. | Link status | Green | On | An active station is connected to the corresponding LAN |
1~4 |
|
|
| port. |
|
|
|
|
|
Speed |
|
| Blinking | The corresponding LAN port is sending or receiving data. |
10/100 | Data Rate | Green |
|
|
On | Data is transmitting in 100Mbps on the corresponding LAN | |||
|
|
|
| port. |
|
|
|
|
|
Reset |
|
|
| To reset system settings to factory defaults |
|
|
|
|
|
Getting Started
Procedure for Hardware Installation
Decide where to place your Wireless Broadband Router
You can place your Wireless Broadband Router on a desk or other flat surface, or you can mount it on a wall. For optimal performance, place your Wireless Broadband Router in the center of your office (or your home) in a location that is away from any potential source of interference, such as a metal wall or microwave oven. This location must be close to power and network connection.
Setup LAN connection
Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one of the LAN ports of this product.
Wireless LAN connection: locate this product at a proper position to gain the best transmit performance.
9