SMC Networks SMCWBR 14-GM manual Appendix a, TCP/IP Configuration for Windows 95/98

Page 40

Appendix A

TCP/IP Configuration for Windows 95/98

This section introduces you how to install TCP/IP protocol into your personal computer. And suppose you have been successfully installed one network card on your personal computer. If not, please refer to your network card manual. Moreover, the Section B.2 tells you how to set TCP/IP values for working with this NAT Router correctly.

A.1 Install TCP/IP Protocol into Your PC

Click Start button and choose Settings, then click Control Panel.

Double click Network icon and select Configuration tab in the Network window.

Click Add button to add network component into your PC.

Double click Protocol to add TCP/IP protocol.

Select Microsoft item in the manufactures list. And choose TCP/IP in the Network Protocols. Click OK button to return to Network window.

39

Image 40

Contents Page SMCWBR14-GM Copyright TrademarksFCC Interference Statement CE Declaration of ConformityTable of Contents Features IntroductionWireless functions High speed for wireless LAN connection User-Definable Application Sensing TunnelDMZ Host supported Statistics of WAN SupportedSystem Requirements Hardware Ports and Buttons Package ListPort Description LED Indicators Ethernet routerPort DevicesProcedure for Hardware Installation Getting StartedPing Pinging 192.168.2.1 with 32 bytes of data Request timed outConfiguring Wireless Broadband Router Start-up and LogStatus Wizard Setup Wizard Select Time Zone Page System Settings Time Zone Password SettingsEnable / Disable Remote Management WAN Setup Page Page DNS LAN & Dhcp Server Wireless Settings 802.1XRadius Shared Key WPA-PSKWPA AP2 AP3 WDSWireless Distribution SystemMac00-50-18-00-0f-fe Mac00-50-18-00-0f-fd AP1 Setting AP2 Setting AP3 SettingVirtual Server Special ApplicationPage Firewall Parental ControlMAC Filter Enable URL Blocking EnableURL Website Blocking Advanced Firewall Settings Demilitarized Zone DMZ Dynamic DNS Services UPnP Configuration Tools Firmware UpgradeBackup Settings Reset To Factory DefaultsInstall TCP/IP Protocol into Your PC TCP/IP Configuration for Windows 95/98Appendix a Set TCP/IP Protocol for Working with NAT Router Page Don’t input any value in the Gateway tab Page Page Testing Environment Use Windows 2000 Radius Server Equipment DetailsDUT Configuration DUT and Windows 2000 Radius Server SetupPage Enable Ieee 802.1X access control Eaptls Certificate information on PC1 Authentication success Page WPA-PSK Open Adapters Add and edit some settings Page Page Page WPA Page Then Choose certificate like above Page Page Go Network and Select 1 and ok Page Page Client Restore with Reset button Restore directly when the router power onTesla Irvine, CA Phone 949