SMC Networks SMCWBR 14-GM manual AP1 Setting

Page 27

Blue Line: Wireless

Black Line: Wire

If the Settings are ok, the client1 and client2 can get IP from DHCP server. Of AP1.Then Client1 and Client2 can get information each other.

AP1 Setting:

AP1ÅÆAP2 (Remote Mac: 00-50-18-00-0f-fd)

AP1ÅÆAP3 (Remote Mac: 00-50-18-00-0f-fc)

26

Image 27

Contents Page SMCWBR14-GM CE Declaration of Conformity CopyrightTrademarks FCC Interference StatementTable of Contents Introduction FeaturesStatistics of WAN Supported Wireless functions High speed for wireless LAN connectionUser-Definable Application Sensing Tunnel DMZ Host supportedSystem Requirements Package List Hardware Ports and ButtonsPort Description Devices LED IndicatorsEthernet router PortGetting Started Procedure for Hardware InstallationPinging 192.168.2.1 with 32 bytes of data Request timed out PingStart-up and Log Configuring Wireless Broadband RouterStatus Wizard Setup Wizard Select Time Zone Page Time Zone Password Settings System SettingsEnable / Disable Remote Management WAN Setup Page Page DNS LAN & Dhcp Server 802.1X Wireless Settings WPA-PSK Radius Shared KeyWPA WDSWireless Distribution System AP2 AP3Mac00-50-18-00-0f-fe Mac00-50-18-00-0f-fd AP1 Setting AP3 Setting AP2 SettingSpecial Application Virtual ServerPage Parental Control FirewallMAC Filter URL Blocking Enable EnableURL Website Blocking Advanced Firewall Settings Demilitarized Zone DMZ Dynamic DNS Services UPnP Firmware Upgrade Configuration ToolsReset To Factory Defaults Backup SettingsTCP/IP Configuration for Windows 95/98 Install TCP/IP Protocol into Your PCAppendix a Set TCP/IP Protocol for Working with NAT Router Page Don’t input any value in the Gateway tab Page Page Equipment Details Testing Environment Use Windows 2000 Radius ServerDUT and Windows 2000 Radius Server Setup DUT ConfigurationPage Enable Ieee 802.1X access control Eaptls Certificate information on PC1 Authentication success Page WPA-PSK Open Adapters Add and edit some settings Page Page Page WPA Page Then Choose certificate like above Page Page Go Network and Select 1 and ok Page Page Client Restore directly when the router power on Restore with Reset buttonTesla Irvine, CA Phone 949