SMC Networks SMCWBR 14-GM manual Advanced Firewall Settings

Page 34

Advanced Firewall Settings

Enable the Advanced Firewall Protection if you want:

Hacker attack monitoring and logging

Advanced System Log

Email Notification

Enable the Discard Ping from WAN option if you don’t want to be seen on the Internet. You can also enable / disable VPN protocols to pass through your NAT Firewall

Set up your E-Mail address and servers to get the notification emails on the desired account.

33

Image 34
Contents Page SMCWBR14-GM FCC Interference Statement CopyrightTrademarks CE Declaration of ConformityTable of Contents Features IntroductionDMZ Host supported Wireless functions High speed for wireless LAN connectionUser-Definable Application Sensing Tunnel Statistics of WAN SupportedSystem Requirements Hardware Ports and Buttons Package ListPort Description Port LED IndicatorsEthernet router DevicesProcedure for Hardware Installation Getting StartedPing Pinging 192.168.2.1 with 32 bytes of data Request timed outConfiguring Wireless Broadband Router Start-up and LogStatus Wizard Setup Wizard Select Time Zone Page System Settings Time Zone Password SettingsEnable / Disable Remote Management WAN Setup Page Page DNS LAN & Dhcp Server Wireless Settings 802.1XRadius Shared Key WPA-PSKWPA AP2 AP3 WDSWireless Distribution SystemMac00-50-18-00-0f-fe Mac00-50-18-00-0f-fd AP1 Setting AP2 Setting AP3 SettingVirtual Server Special ApplicationPage Firewall Parental ControlMAC Filter Enable URL Blocking EnableURL Website Blocking Advanced Firewall Settings Demilitarized Zone DMZ Dynamic DNS Services UPnP Configuration Tools Firmware UpgradeBackup Settings Reset To Factory DefaultsInstall TCP/IP Protocol into Your PC TCP/IP Configuration for Windows 95/98Appendix a Set TCP/IP Protocol for Working with NAT Router Page Don’t input any value in the Gateway tab Page Page Testing Environment Use Windows 2000 Radius Server Equipment DetailsDUT Configuration DUT and Windows 2000 Radius Server SetupPage Enable Ieee 802.1X access control Eaptls Certificate information on PC1 Authentication success Page WPA-PSK Open Adapters Add and edit some settings Page Page Page WPA Page Then Choose certificate like above Page Page Go Network and Select 1 and ok Page Page Client Restore with Reset button Restore directly when the router power onTesla Irvine, CA Phone 949