SMC Networks SMCWBR 14-GM manual Authentication success

Page 52

Figure 6: Authentication success

4.2DUT authenticate PC2 using PEAP-TLS.

PC2 choose the SSID of DUT as the Access Point.

Set authentication type of wireless client and RADIUS server both to

PEAP_TLS.

Disable the wireless connection and enable again.

The DUT will send the user's certificate to the RADIUS server, and then send the message of authentication result to PC2.

Windows XP will prompt that the authentication process is success or fail and end the authentication procedure.

Terminate the test steps when PC2 get dynamic IP and PING remote host successfully.

Support Type: The router supports the types of 802.1x Authentication:

PEAP-CHAPv2 and PEAP-TLS.

Note.

PC1 is on Windows XP platform without Service Pack 1.

PC2 is on Windows XP platform with Service Pack 1a.

PEAP is supported on Windows XP with Service Pack 1 only.

Windows XP with Service Pack 1 allows 802.1x authentication only when data encryption function is enable.

51

Image 52
Contents Page SMCWBR14-GM Copyright TrademarksFCC Interference Statement CE Declaration of ConformityTable of Contents Features IntroductionWireless functions High speed for wireless LAN connection User-Definable Application Sensing TunnelDMZ Host supported Statistics of WAN SupportedSystem Requirements Hardware Ports and Buttons Package ListPort Description LED Indicators Ethernet routerPort DevicesProcedure for Hardware Installation Getting StartedPing Pinging 192.168.2.1 with 32 bytes of data Request timed outConfiguring Wireless Broadband Router Start-up and LogStatus Wizard Setup Wizard Select Time Zone Page System Settings Time Zone Password SettingsEnable / Disable Remote Management WAN Setup Page Page DNS LAN & Dhcp Server Wireless Settings 802.1XRadius Shared Key WPA-PSKWPA AP2 AP3 WDSWireless Distribution SystemMac00-50-18-00-0f-fe Mac00-50-18-00-0f-fd AP1 Setting AP2 Setting AP3 SettingVirtual Server Special ApplicationPage Firewall Parental ControlMAC Filter Enable URL Blocking EnableURL Website Blocking Advanced Firewall Settings Demilitarized Zone DMZ Dynamic DNS Services UPnP Configuration Tools Firmware UpgradeBackup Settings Reset To Factory DefaultsInstall TCP/IP Protocol into Your PC TCP/IP Configuration for Windows 95/98Appendix a Set TCP/IP Protocol for Working with NAT Router Page Don’t input any value in the Gateway tab Page Page Testing Environment Use Windows 2000 Radius Server Equipment DetailsDUT Configuration DUT and Windows 2000 Radius Server SetupPage Enable Ieee 802.1X access control Eaptls Certificate information on PC1 Authentication success Page WPA-PSK Open Adapters Add and edit some settings Page Page Page WPA Page Then Choose certificate like above Page Page Go Network and Select 1 and ok Page Page Client Restore with Reset button Restore directly when the router power onTesla Irvine, CA Phone 949