SMC Networks SMCWBR 14-GM manual Copyright, Trademarks, FCC Interference Statement

Page 3

Copyright

The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission.

Trademarks

All products, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. This equipment can generate, use and radiate radio frequency energy and, if not installed and used in accordance with the instructions in this manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user, at his own expense, will be required to take whatever measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022/A1 Class B.

Note. The content of user manual will be revised without notice.

2

Image 3
Contents Page SMCWBR14-GM CE Declaration of Conformity CopyrightTrademarks FCC Interference StatementTable of Contents Introduction FeaturesStatistics of WAN Supported Wireless functions High speed for wireless LAN connectionUser-Definable Application Sensing Tunnel DMZ Host supportedSystem Requirements Package List Hardware Ports and ButtonsPort Description Devices LED IndicatorsEthernet router PortGetting Started Procedure for Hardware InstallationPinging 192.168.2.1 with 32 bytes of data Request timed out PingStart-up and Log Configuring Wireless Broadband RouterStatus Wizard Setup Wizard Select Time Zone Page Time Zone Password Settings System SettingsEnable / Disable Remote Management WAN Setup Page Page DNS LAN & Dhcp Server 802.1X Wireless SettingsWPA-PSK Radius Shared KeyWPA WDSWireless Distribution System AP2 AP3Mac00-50-18-00-0f-fe Mac00-50-18-00-0f-fd AP1 Setting AP3 Setting AP2 SettingSpecial Application Virtual ServerPage Parental Control FirewallMAC Filter URL Blocking Enable EnableURL Website Blocking Advanced Firewall Settings Demilitarized Zone DMZ Dynamic DNS Services UPnP Firmware Upgrade Configuration ToolsReset To Factory Defaults Backup SettingsTCP/IP Configuration for Windows 95/98 Install TCP/IP Protocol into Your PCAppendix a Set TCP/IP Protocol for Working with NAT Router Page Don’t input any value in the Gateway tab Page Page Equipment Details Testing Environment Use Windows 2000 Radius ServerDUT and Windows 2000 Radius Server Setup DUT ConfigurationPage Enable Ieee 802.1X access control Eaptls Certificate information on PC1 Authentication success Page WPA-PSK Open Adapters Add and edit some settings Page Page Page WPA Page Then Choose certificate like above Page Page Go Network and Select 1 and ok Page Page Client Restore directly when the router power on Restore with Reset buttonTesla Irvine, CA Phone 949