SMC Networks SMCWBR 14-GM manual

Page 30

Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony, etc. Because of the firewall function, these applications cannot work with a pure NAT router. The Special Applications feature allows some of these applications to work with this product. If the mechanism of Special Applications fails to make an application work, try setting your computer as the DMZ host instead.

Trigger: the outbound port number issued by the application..

Incoming Ports: when the trigger packet is detected, the inbound packets sent to the specified port numbers are allowed to pass through the firewall.

This product provides some predefined settings Select your application and click Copy to to add the predefined setting to your list.

Note! At any given time, only one PC can use each Special Application tunnel.

29

Image 30
Contents Page SMCWBR14-GM FCC Interference Statement CopyrightTrademarks CE Declaration of ConformityTable of Contents Features IntroductionDMZ Host supported Wireless functions High speed for wireless LAN connectionUser-Definable Application Sensing Tunnel Statistics of WAN SupportedSystem Requirements Package List Hardware Ports and ButtonsPort Description Port LED IndicatorsEthernet router DevicesProcedure for Hardware Installation Getting StartedPing Pinging 192.168.2.1 with 32 bytes of data Request timed outConfiguring Wireless Broadband Router Start-up and LogStatus Wizard Setup Wizard Select Time Zone Page System Settings Time Zone Password SettingsEnable / Disable Remote Management WAN Setup Page Page DNS LAN & Dhcp Server Wireless Settings 802.1XRadius Shared Key WPA-PSKWPA WDSWireless Distribution System AP2 AP3Mac00-50-18-00-0f-fe Mac00-50-18-00-0f-fd AP1 Setting AP2 Setting AP3 SettingVirtual Server Special ApplicationPage Firewall Parental ControlMAC Filter URL Blocking Enable EnableURL Website Blocking Advanced Firewall Settings Demilitarized Zone DMZ Dynamic DNS Services UPnP Configuration Tools Firmware UpgradeBackup Settings Reset To Factory DefaultsTCP/IP Configuration for Windows 95/98 Install TCP/IP Protocol into Your PCAppendix a Set TCP/IP Protocol for Working with NAT Router Page Don’t input any value in the Gateway tab Page Page Testing Environment Use Windows 2000 Radius Server Equipment DetailsDUT Configuration DUT and Windows 2000 Radius Server SetupPage Enable Ieee 802.1X access control Eaptls Certificate information on PC1 Authentication success Page WPA-PSK Open Adapters Add and edit some settings Page Page Page WPA Page Then Choose certificate like above Page Page Go Network and Select 1 and ok Page Page Client Restore with Reset button Restore directly when the router power onTesla Irvine, CA Phone 949