SMC Networks SMCWBR14-N2 manual Advanced Optional Backup Radius Server

Page 21

Wireless Networking technology enables ubiquitous communication

WPA-Enterprise

This option works with a RADIUS Server to authenticate wireless clients. Wireless clients should have established the necessary credentials before attempting to authenticate to the Server through this Gateway. Furthermore, it may be necessary to configure the RADIUS Server to allow this Gateway to authenticate users.

Authentication Timeout: Amount of time before a client will be required to re-authenticate.

RADIUS Server IP Address: The IP address of the authentication server.

RADIUS Server Port: The port number used to connect to the authentication server.

RADIUS Server Shared Secret: A pass-phrase that must match with the authentication server.

MAC Address Authentication: If this is selected, the user must connect from the same computer whenever logging into the wireless network.

Advanced:

Optional Backup RADIUS Server

This option enables configuration of an optional second RADIUS server. A second RADIUS server can be used as backup for the primary RADIUS server. The second RADIUS server is consulted only when the primary server is not available or not responding. The fields Second RADIUS Server IP Address, RADIUS Server Port, Second RADIUS server Shared Secret, Second MAC Address Authentication provide the corresponding parameters for the second RADIUS Server.

18

Image 21

Contents User Guide Limited Warranty Page Important Note CE Mark Declaration of Conformance for EMI and Safety EECFCC Radiation Exposure Statement IiiTable of Contents SMCWBR14-N2 Package Contents AD-HOCIBSS Network Wireless LAN NetworkingChannel for each station Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration MenuBasicInternet BasicBasicWireless Wireless Network Name Enable WirelessEnable Auto Channel Scan Wireless ChannelExample WEPWPA-Personal and WPA-Enterprise WPA-PersonalAdvanced Optional Backup Radius Server BasicNetwork Settings Enable RIP Router SettingsRIP Operating mode IP AddressAllow RIP updates from WAN Act as default routerRIP Password Dhcp Server SettingsAlways Broadcast Dhcp Lease TimeAdd/Edit Dhcp Reservation Computer NameNumber of Dynamic Dhcp Clients Dhcp Reservations ListRevoke ReserveAdvancedVirtual Server AdvancedProtocol Virtual Server Parameters NamePrivate Port Public PortSchedule EnableAdd/Edit Virtual Server SaveAdvancedSpecial Applications Parameters for an Application Rule ExampleApplication Trigger Protocol Trigger Port RangeInput Port Range Input ProtocolAdvancedGaming TCP Ports To Open Port Forwarding Fields NameUDP Ports To Open Edit/Add Game RuleAdvancedStreamEngine StreamEngine Setup Enable StreamEngineDynamic Fragmentation Automatic ClassificationAutomatic Uplink Speed Measured Uplink SpeedPriority Add/Edit StreamEngine Rule EnableSource IP Range Source Port RangeAdd/Edit Route AdvancedRoutingRoutes List AdvancedAccess Control Policy WizardAdd Policy Policy Table AdvancedWEB Filter Web Filter Parameters Web SiteAdd/Edit Web Site Allowed Web Site List Filter Settings Mode Enable MAC Address FilterFilter Wireless Clients AdvancedMAC Address FilterFilter Wired Clients Add/Edit MAC AddressMAC Address List AdvancedFirewall NAT Endpoint Filtering Firewall Settings Enable SPIEndpoint Independent Address RestrictedEnable DMZ DMZ HostDMZ IP Address Rtsp PptpNetmeeting FTPSIP Wake-On-LANAdvancedInbound Filter Action Add/Edit Inbound Filter RuleInbound Filter Rules List Allow AllAdvancedAdvanced Wireless WMM Enable 802.11d EnableExtra Wireless Protection WDS EnableEnable WAN Ping Respond Enable UPnPAdvancedNetwork UPnPAdvancedWISH Enable Multicast StreamsWAN Port Speed Multicast StreamsHttp WishHost 1 IP Range Save/UpdateHost 1 Port Range Host 2 IP RangeWi-Fi Protected Setup Enable AdvancedWi-Fi Protected SetupLock Wireless Security Settings PIN SettingsAdd Wireless Device Wizard Reset PIN to DefaultCurrent PIN Generate New PINTools ToolsAdminUser Password Admin PasswordEnable Remote Management Remote Admin PortEnable Daylight Saving Time Configuration Current Router TimeToolsTime Time ZoneDaylight Saving Offset Automatic Time Configuration Enable NTP ServerDST Start and DST End NTP Server UsedEnable Logging to Syslog Server ToolsSyslogSyslog Server IP Address ToolsEmail Settings Verify Password Email Log When Full or on Schedule On Log FullOn Schedule Load Settings From Local Hard Drive Save Settings To Local Hard DriveRestore To Factory Default Settings Reboot The DeviceToolsFirmware Firmware UpgradeFirmware Information Check OnlineUpload ToolsDynamic DNS Timeout ToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice infoPPPoE, PPTP, L2TP Connection Dhcp ConnectionBigPond Connection LAN ComputersStatusWireless SignalRate StatusRouting StatusLogs Apply Log Settings NowWhat to View View LevelsRefresh Email NowSave Log StatusStatistics Internal StatusActive SessionsExternal NATDir StatusWISH SessionsOut Time OutTarget OriginatorEstablished or closing TCP connections Ascii AdslBootp CAT DMZ DhcpDNS DSLEAP GUI Icmp HttpsIeee IgmpISP IPXLED LANLPR/LPD L2TPMIB MdixMppe MTUNTP NICOfdm OSIPPP RadiusRIP Smtp RSASnmp SohoTCP SsidTCP/IP TftpUSB URLUTP VlanWisp WDSWlan WPA802.11 Yagi antennaTechnical Support