SMC Networks SMCWBR14-N2 manual Priority, Source IP Range, Source Port Range, Destination IP Range

Page 36

that every flow defined in a rule receives the expected priority and avoids indeterminate prioritization that could reduce QoS effectiveness.

Name

Create a name for the rule that is meaningful to you.

Priority

The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority (least urgent). Priority 0 is reserved. Flows that are not prioritized by any rule receive lowest priority.

Protocol

The protocol used by the messages. The common choices can be selected from the drop-down menu. To specify any other protocol, enter its protocol number (as assigned by the IANA) in the Protocol box.

Source IP Range

The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.

Source Port Range

The rule applies to a flow of messages whose LAN-side port number is within the range set here.

Destination IP Range

The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.

Destination Port Range

The rule applies to a flow of messages whose WAN-side port number is within the range set here.

Add/Edit StreamEngine Rule

Enable

Each entry in StreamEngine Rules List can be active (enabled) or inactive (disabled)

Save

Saves the new or edited StreamEngine Rule in the following list. When finished updating the StreamEngine rules, you must still click the Save Settings button at the top of the page to make the changes effective and permanent.

StreamEngine Rules List

The section shows the currently defined StreamEngine rules. A StreamEngine rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit StreamEngine Rule" section is activated for editing.

33

Page 35 Page 37
Image 36
Page 35 Page 37
Contents User Guide Limited Warranty Page CE Mark Declaration of Conformance for EMI and Safety EEC Important NoteFCC Radiation Exposure Statement IiiTable of Contents SMCWBR14-N2 Package Contents Wireless LAN Networking AD-HOCIBSS NetworkChannel for each station Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started Using the Configuration Menu ¾ Click LogBasic BasicInternetBasicWireless Enable Wireless Wireless Network NameEnable Auto Channel Scan Wireless ChannelWEP ExampleWPA-Personal and WPA-Enterprise WPA-PersonalAdvanced Optional Backup Radius Server BasicNetwork Settings Router Settings Enable RIPRIP Operating mode IP AddressAct as default router Allow RIP updates from WANRIP Password Dhcp Server SettingsDhcp Lease Time Always BroadcastAdd/Edit Dhcp Reservation Computer NameDhcp Reservations List Number of Dynamic Dhcp ClientsRevoke ReserveAdvanced AdvancedVirtual ServerVirtual Server Parameters Name ProtocolPrivate Port Public PortEnable ScheduleAdd/Edit Virtual Server SaveAdvancedSpecial Applications Parameters for an Application Rule ExampleApplication Trigger Port Range Trigger ProtocolInput Port Range Input ProtocolAdvancedGaming Port Forwarding Fields Name TCP Ports To OpenUDP Ports To Open Edit/Add Game RuleStreamEngine Setup Enable StreamEngine AdvancedStreamEngineAutomatic Classification Dynamic FragmentationAutomatic Uplink Speed Measured Uplink SpeedAdd/Edit StreamEngine Rule Enable PrioritySource IP Range Source Port RangeAdvancedRouting Add/Edit RouteRoutes List AdvancedAccess Control Policy WizardAdd Policy Policy Table AdvancedWEB Filter Web Filter Parameters Web SiteAdd/Edit Web Site Allowed Web Site List Enable MAC Address Filter Filter Settings ModeFilter Wireless Clients AdvancedMAC Address FilterFilter Wired Clients Add/Edit MAC AddressMAC Address List AdvancedFirewall Firewall Settings Enable SPI NAT Endpoint FilteringEndpoint Independent Address RestrictedEnable DMZ DMZ HostDMZ IP Address Pptp RtspFTP NetmeetingSIP Wake-On-LANAdvancedInbound Filter Add/Edit Inbound Filter Rule ActionInbound Filter Rules List Allow AllAdvancedAdvanced Wireless 802.11d Enable WMM EnableExtra Wireless Protection WDS EnableEnable UPnP Enable WAN Ping RespondAdvancedNetwork UPnPEnable Multicast Streams AdvancedWISHWAN Port Speed Multicast StreamsWish HttpSave/Update Host 1 IP RangeHost 1 Port Range Host 2 IP RangeAdvancedWi-Fi Protected Setup Wi-Fi Protected Setup EnableLock Wireless Security Settings PIN SettingsReset PIN to Default Add Wireless Device WizardCurrent PIN Generate New PINToolsAdmin ToolsAdmin Password User PasswordEnable Remote Management Remote Admin PortTime Configuration Current Router Time Enable Daylight SavingToolsTime Time ZoneAutomatic Time Configuration Enable NTP Server Daylight Saving OffsetDST Start and DST End NTP Server UsedEnable Logging to Syslog Server ToolsSyslogSyslog Server IP Address ToolsEmail Settings Verify Password Email Log When Full or on Schedule On Log FullOn Schedule Save Settings To Local Hard Drive Load Settings From Local Hard DriveRestore To Factory Default Settings Reboot The DeviceFirmware Upgrade ToolsFirmwareFirmware Information Check OnlineUpload ToolsDynamic DNS Timeout ToolsSystem Check ToolsSchedules Schedule Rules List StatusDevice info Statistics and Active SessionsDhcp Connection PPPoE, PPTP, L2TP ConnectionBigPond Connection LAN ComputersStatusWireless SignalRate StatusRouting Apply Log Settings Now StatusLogsWhat to View View LevelsRefresh Email NowSave Log StatusStatistics StatusActive Sessions InternalExternal NATStatusWISH Sessions DirOut Time OutOriginator TargetEstablished or closing TCP connections Adsl AsciiBootp CAT Dhcp DMZDNS DSLEAP GUI Https IcmpIeee IgmpIPX ISPLAN LEDLPR/LPD L2TPMdix MIBMppe MTUNIC NTPOfdm OSIPPP RadiusRIP RSA SmtpSnmp SohoSsid TCPTCP/IP TftpURL USBUTP VlanWDS WispWlan WPAYagi antenna 802.11Technical Support
Top Page Image Contents