SMC Networks SMCWBR14-N2 Schedule, Add/Edit Virtual Server, Enable, Save, Virtual Servers List

Page 29

a new filter.

Schedule

Select a schedule for when the service will be enabled. If you do not see the schedule you need in the list of schedules, go to the Tools → Schedules screen and create a new schedule.

Add/Edit Virtual Server

In this section you can add an entry to the Virtual Servers List below or edit an existing entry.

Enable

Entries in the list can be either active (enabled) or inactive (disabled).

Save

Saves the new or edited virtual server entry in the following list. When finished updating the virtual server entries, you must still click the Save Settings button at the top of the page to make the changes effective and permanent.

Virtual Servers List

The section shows the currently defined virtual servers. A Virtual Server can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit Virtual Server" section is activated for editing.

You might have trouble accessing a virtual server using its public identity (WAN-side IP-address of the gateway or its dynamic DNS name) from a machine on the LAN. Your requests may not be looped back or you may be redirected to the "Forbidden" page.

This will happen if you have an Access Control Rule configured for this LAN machine.

The requests from the LAN machine will not be looped back if Internet access is blocked at the time of access. To work around this problem, access the LAN machine using its LAN-side identity.

Requests may be redirected to the "Forbidden" page if web access for the LAN machine is restricted by an Access Control Rule. Add the WAN-side identity (WAN-side IP-address of the router or its dynamic DNS name) on the Advanced → Web Filter screen to work around this problem.

26

Image 29

Contents User Guide Limited Warranty Page Important Note CE Mark Declaration of Conformance for EMI and Safety EECFCC Radiation Exposure Statement IiiTable of Contents SMCWBR14-N2 Package Contents AD-HOCIBSS Network Wireless LAN NetworkingChannel for each station Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration MenuBasicInternet BasicBasicWireless Wireless Network Name Enable WirelessEnable Auto Channel Scan Wireless ChannelExample WEPWPA-Personal and WPA-Enterprise WPA-PersonalAdvanced Optional Backup Radius Server BasicNetwork Settings Enable RIP Router SettingsRIP Operating mode IP AddressAllow RIP updates from WAN Act as default routerRIP Password Dhcp Server SettingsAlways Broadcast Dhcp Lease TimeAdd/Edit Dhcp Reservation Computer NameNumber of Dynamic Dhcp Clients Dhcp Reservations ListRevoke ReserveAdvancedVirtual Server AdvancedProtocol Virtual Server Parameters NamePrivate Port Public PortSchedule EnableAdd/Edit Virtual Server SaveApplication AdvancedSpecial ApplicationsParameters for an Application Rule Example Trigger Protocol Trigger Port RangeInput Port Range Input ProtocolAdvancedGaming TCP Ports To Open Port Forwarding Fields NameUDP Ports To Open Edit/Add Game RuleAdvancedStreamEngine StreamEngine Setup Enable StreamEngineDynamic Fragmentation Automatic ClassificationAutomatic Uplink Speed Measured Uplink SpeedPriority Add/Edit StreamEngine Rule EnableSource IP Range Source Port RangeAdd/Edit Route AdvancedRoutingRoutes List Add Policy AdvancedAccess ControlPolicy Wizard Policy Table Add/Edit Web Site AdvancedWEB FilterWeb Filter Parameters Web Site Allowed Web Site List Filter Settings Mode Enable MAC Address FilterFilter Wireless Clients AdvancedMAC Address FilterMAC Address List Filter Wired ClientsAdd/Edit MAC Address AdvancedFirewall NAT Endpoint Filtering Firewall Settings Enable SPIEndpoint Independent Address RestrictedDMZ IP Address Enable DMZDMZ Host Rtsp PptpNetmeeting FTPSIP Wake-On-LANAdvancedInbound Filter Action Add/Edit Inbound Filter RuleInbound Filter Rules List Allow AllAdvancedAdvanced Wireless WMM Enable 802.11d EnableExtra Wireless Protection WDS EnableEnable WAN Ping Respond Enable UPnPAdvancedNetwork UPnPAdvancedWISH Enable Multicast StreamsWAN Port Speed Multicast StreamsHttp WishHost 1 IP Range Save/UpdateHost 1 Port Range Host 2 IP RangeWi-Fi Protected Setup Enable AdvancedWi-Fi Protected SetupLock Wireless Security Settings PIN SettingsAdd Wireless Device Wizard Reset PIN to DefaultCurrent PIN Generate New PINTools ToolsAdminUser Password Admin PasswordEnable Remote Management Remote Admin PortEnable Daylight Saving Time Configuration Current Router TimeToolsTime Time ZoneDaylight Saving Offset Automatic Time Configuration Enable NTP ServerDST Start and DST End NTP Server UsedSyslog Server IP Address Enable Logging to Syslog ServerToolsSyslog ToolsEmail Settings On Schedule Verify PasswordEmail Log When Full or on Schedule On Log Full Load Settings From Local Hard Drive Save Settings To Local Hard DriveRestore To Factory Default Settings Reboot The DeviceToolsFirmware Firmware UpgradeFirmware Information Check OnlineUpload ToolsDynamic DNS Timeout ToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice infoPPPoE, PPTP, L2TP Connection Dhcp ConnectionBigPond Connection LAN ComputersRate StatusWirelessSignal StatusRouting StatusLogs Apply Log Settings NowWhat to View View LevelsSave Log RefreshEmail Now StatusStatistics Internal StatusActive SessionsExternal NATDir StatusWISH SessionsOut Time OutTarget OriginatorEstablished or closing TCP connections Ascii AdslBootp CAT DMZ DhcpEAP DNSDSL GUI Icmp HttpsIeee IgmpISP IPXLED LANLPR/LPD L2TPMIB MdixMppe MTUNTP NICOfdm OSIRIP PPPRadius Smtp RSASnmp SohoTCP SsidTCP/IP TftpUSB URLUTP VlanWisp WDSWlan WPA802.11 Yagi antennaTechnical Support