Chapter 2 — Configuring the CK30

bPress Enter. Once the radio starts to authenticate, the Network Password dialog box appears:

cEnter a User Name and Password and select the Save Password checkbox.

d(Optional) In the Domain field, enter the domain that you need to access to obtain the certificates.

ePress Enter. You return to the Communications menu.

7Exit the Configuration Utility.

To enable WPA-PSK security on your CK30

1Press Cand then Bto open the System Main Menu.

2Choose Configuration Utility > Communications > 802.11 Radio > Security.

3For Network Authentication, choose WPA-PSK.

4For Network Key Value, enter a pass phrase or pre-shared key.

The pass phrase must be a value between 8 to 63 ASCII characters. The pre-shared key must be a value of 32 Hex pairs. The pre-shared key must be preceded by 0x. The value must match the key value on the access point.

5Exit the Configuration Utility.

CK30 Handheld Computer User’s Manual

51

Page 63
Image 63
Intermec user manual To enable WPA-PSK security on your CK30