Chapter 2 — Configuring the CK30
Configuring the CK30 With the Setup Assistant
When first setting up the CK30, use the Setup Assistant to set or enable basic network parameters and connect your CK30 to the network. The Setup Assistant guides you through setting the following basic network parameters:
•Date and time
•SSID (Network name)
•802.1x security
•DHCP server or IP address, subnet mask, and default router
•Primary and secondary DNS addresses
•Primary and secondary WINS addresses
•Device name
To set other parameters, use the Configuration Utility or another configuration method. The Setup Assistant runs on the CK30 the first time you turn on the computer.
The Setup Assistant Start Screen
However, if you exit Setup Assistant before you are finished configuring the CK30, you can restart it from the System Main Menu. See the next section for information on how to access the System Main Menu.
After you complete the Setup Assistant, the CK30 should be communicating with your network.
CK30 Handheld Computer User’s Manual | 29 |
