Chapter 6 — Troubleshooting and Maintaining the CK30
Do not use force or a sharp object when pressing the reset switch. You may damage the reset switch.
Attention: N'employez pas la force ou un objet pointu quand appuyant sur le remettez à zéro le bouton . Vous pouvez endommager le remettez à zéro le bouton.
3Replace the battery.
The battery light on the CK30 blinks three times and the CK30 starts the power on sequence.
Note: Date and time settings are not saved through a cold boot.
You will need to reset the time and date.
Cleaning the Scanner Window and CK30 Screen
To keep the computer in good working order, you may need to perform these minor maintenance tasks:
•Clean the scanner window.
•Clean the CK30 screen.
Clean the scanner window and CK30 screen as often as needed for the environment in which you are using the computer. To clean the CK30, use a solution of ammonia and water.
There are no
Attention: Le CK30 ne contient pas de pièces réparables par l’utilisateur. Le fait d’ouvrir l’unité annule la garantie et peut endommager les pièces internes.
To clean the scanner window and computer screen
1Press I to turn off the CK30.
2Dip a clean towel or rag in the ammonia solution and wring out the excess. Wipe off the scanner window and screen. Do not allow any abrasive material to touch these surfaces.
3Wipe dry.
104 | CK30 Handheld Computer User’s Manual |