Chapter 2 — Configuring the CK30
To use WPA security, you need:
• An authentication server
Note: You can also use a MobileLAN access point with software release 1.80 or later as an authentication server. For help, see the MobileLAN access System Manual (P/N 067150).
•An access point with an 802.11b/g radio that supports WPA
•CK30 with the 802.11b/g radio and the 802.1x/WPA security option
To enable WPA security on your CK30
1Make sure you have configured the communications and radio parameters on your CK30.
2Press Cand then Bto open the System Main Menu.
3Choose Configuration Utility > Communications > 802.11 Radio > Security.
4For Network Authentication, choose WPA.
5For Data Encryption, choose TKIP.
6For 802.1x Authentication, choose either TLS or PEAP. If you choose TLS:
a Select Properties and choose the Select button.
b Select your certificate from the list and press Enter. If you choose PEAP:
a Select Properties and clear the Validate Server checkbox by tabbing to it and then pressing V.
50 | CK30 Handheld Computer User’s Manual |
