Intermec CK30 user manual Typing Hidden Characters on the VT/ANSI TE Keypads

Appendix A

Typing Hidden Characters on the VT/ANSI TE Keypads

To	Press This Key Sequence on One of the Keypads:
Type:	42-Key	50-Key	52-Key
$	Not hidden	Not hidden	C and then 6
`	Not applicable	Not hidden	C and then G
!	Not hidden	Not hidden	C and then I
«	Not applicable	Not hidden	C and then K
‘	Not applicable	Not hidden	C and then L
{	C and then F5	Not hidden	C and then N
}	C and then F6	Not hidden	C key and then O
:	Not applicable	Not hidden	C and then P
?	Not hidden	Not hidden	C and then R

If you are using the VT/ANSI 42-key keypad for any applications besides terminal emulation, you need to press a different key sequence to access some of the hidden characters. Although you may see some of these characters on the keypad overlay, they have been reassigned to a different keypad location when you are running an application other than terminal emulation. Use this table to understand which keys you need to press to type a character that has been reassigned to a hidden location.

Note: On the VT/ANSI 42-key keypad, the left Enter key only functions when running the terminal emulation application.

Typing Hidden Characters on the VT/ANSI 42-Key Keypad

To Type	Press This Key Sequence on the 42-Key Keypad
?	C and then 5
]	C and then Alpha
[	C and then Tab
<	B and then _
>	B and then `
{	B and then a
}	B and then b
Enter	Right Enter

CK30 Handheld Computer User’s Manual 113