
Chapter 5 — Running Diagnostics
LED Test
Use the LED Test to make sure that your LEDs (lights) are operating correctly. The LED Test turns all of the lights on the CK30 on in this sequence: Good Read light, the
From the System Main Menu:
•Go to Diagnostics > Hardware Diagnostics > LED Test
Memory Information
Use the Memory Info diagnostic to see how much RAM and flash memory is available on the CK30. You can also see the Flash Part ID.
From the System Main Menu:
•Go to Diagnostics > Hardware Diagnostics > Memory Info
Sample Screen
Network Connection Test
Use the Net Connect Test to test the network interface connection if you are using DHCP. The Net Connect Test searches for a DHCP server first. When the test finds a server, press Enter to send the Ping command. If you do not have DHCP enabled, you need to enter the IP address of the host to ping and then press Enter. The test sends the ping command four times and displays the results. If you receive a result other than ping OK, the test failed.
CK30 Handheld Computer User’s Manual | 89 |