Intermec user manual Press I to turn on the CK30

Chapter 1 — Using the CK30 Handheld Computer

Scanning With the Integrated Laser Scanner and 1D Linear Imager

If the CK30 has a laser scanner or 1D linear imager, use the following procedure to practice how to scan a bar code. The linear imager can decode PDF417 bar codes as well as bar codes with high-density, wide-density, and poor quality in any lighting conditions.

To scan a bar code label with the laser scanner and 1D linear imager

1Press I to turn on the CK30.

2Point the scanner window at the bar code label and hold the computer at a slight angle six to ten inches from the label.

Note: If you have an advanced long-range scanner, you may need to hold the computer further away from the label.

3Press the Scan button on the keypad or pull the trigger on a handle and direct the red beam so that it falls across all bars in the bar code label.

Good Read light

Scan button

Scanning: Using the integrated laser scanner or 1D linear imager to scan a bar code label.

CK30 Handheld Computer User’s Manual 21