SMC Networks SMCWBR14-N2 manual StatusWISH Sessions, Dir, Time Out, Seconds

Page 83

•SS: SYN Sent -- One of the systems is attempting to start a connection.

•EST: Established -- the connection is passing data.

•FW: FIN Wait -- The client system has requested that the connection be stopped.

•CW: Close Wait -- the server system has requested that the connection be stopped.

•TW: Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed.

•LA: Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed.

•CL: Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets still pending.

Dir

The direction of initiation of the conversation:

Out

Initiated from LAN to WAN.

In

Initiated from WAN to LAN.

Time Out

The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends on the type and state of the connection.

300 seconds

UDP connections.

20 seconds

Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the connection can be re-established.

120 seconds

Opening or closing TCP connections.

7800 seconds

Established TCP connections.

Status_WISH Sessions

The WISH Sessions page displays full details of active local wireless sessions through your router when WISH has been enabled. A WISH session is a conversation between a program or application on a wirelessly connected LAN-side computer and another computer, however connected.

80

Image 83

Contents User Guide Limited Warranty Page Iii CE Mark Declaration of Conformance for EMI and Safety EECImportant Note FCC Radiation Exposure StatementTable of Contents SMCWBR14-N2 Package Contents AD-HOCIBSS Network Wireless LAN NetworkingChannel for each station Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration MenuBasicInternet BasicBasicWireless Wireless Channel Enable WirelessWireless Network Name Enable Auto Channel ScanWPA-Personal WEPExample WPA-Personal and WPA-EnterpriseAdvanced Optional Backup Radius Server BasicNetwork Settings IP Address Router SettingsEnable RIP RIP Operating modeDhcp Server Settings Act as default routerAllow RIP updates from WAN RIP PasswordComputer Name Dhcp Lease TimeAlways Broadcast Add/Edit Dhcp ReservationReserve Dhcp Reservations ListNumber of Dynamic Dhcp Clients RevokeAdvancedVirtual Server AdvancedPublic Port Virtual Server Parameters NameProtocol Private PortSave EnableSchedule Add/Edit Virtual ServerApplication AdvancedSpecial ApplicationsParameters for an Application Rule Example Input Protocol Trigger Port RangeTrigger Protocol Input Port RangeAdvancedGaming Edit/Add Game Rule Port Forwarding Fields NameTCP Ports To Open UDP Ports To OpenAdvancedStreamEngine StreamEngine Setup Enable StreamEngineMeasured Uplink Speed Automatic ClassificationDynamic Fragmentation Automatic Uplink SpeedSource Port Range Add/Edit StreamEngine Rule EnablePriority Source IP RangeAdd/Edit Route AdvancedRoutingRoutes List Add Policy AdvancedAccess ControlPolicy Wizard Policy Table Add/Edit Web Site AdvancedWEB FilterWeb Filter Parameters Web Site Allowed Web Site List AdvancedMAC Address Filter Enable MAC Address FilterFilter Settings Mode Filter Wireless ClientsMAC Address List Filter Wired ClientsAdd/Edit MAC Address AdvancedFirewall Address Restricted Firewall Settings Enable SPINAT Endpoint Filtering Endpoint IndependentDMZ IP Address Enable DMZDMZ Host Rtsp PptpWake-On-LAN FTPNetmeeting SIPAdvancedInbound Filter Allow All Add/Edit Inbound Filter RuleAction Inbound Filter Rules ListAdvancedAdvanced Wireless WDS Enable 802.11d EnableWMM Enable Extra Wireless ProtectionUPnP Enable UPnPEnable WAN Ping Respond AdvancedNetworkMulticast Streams Enable Multicast StreamsAdvancedWISH WAN Port SpeedHttp WishHost 2 IP Range Save/UpdateHost 1 IP Range Host 1 Port RangePIN Settings AdvancedWi-Fi Protected SetupWi-Fi Protected Setup Enable Lock Wireless Security SettingsGenerate New PIN Reset PIN to DefaultAdd Wireless Device Wizard Current PINTools ToolsAdminRemote Admin Port Admin PasswordUser Password Enable Remote ManagementTime Zone Time Configuration Current Router TimeEnable Daylight Saving ToolsTimeNTP Server Used Automatic Time Configuration Enable NTP ServerDaylight Saving Offset DST Start and DST EndSyslog Server IP Address Enable Logging to Syslog ServerToolsSyslog ToolsEmail Settings On Schedule Verify PasswordEmail Log When Full or on Schedule On Log Full Reboot The Device Save Settings To Local Hard DriveLoad Settings From Local Hard Drive Restore To Factory Default SettingsCheck Online Firmware UpgradeToolsFirmware Firmware InformationUpload ToolsDynamic DNS Timeout ToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice infoLAN Computers Dhcp ConnectionPPPoE, PPTP, L2TP Connection BigPond ConnectionRate StatusWirelessSignal StatusRouting View Levels Apply Log Settings NowStatusLogs What to ViewSave Log RefreshEmail Now StatusStatistics NAT StatusActive SessionsInternal ExternalTime Out StatusWISH SessionsDir OutTarget OriginatorEstablished or closing TCP connections Ascii AdslBootp CAT DMZ DhcpEAP DNSDSL GUI Igmp HttpsIcmp IeeeISP IPXL2TP LANLED LPR/LPDMTU MdixMIB MppeOSI NICNTP OfdmRIP PPPRadius Soho RSASmtp SnmpTftp SsidTCP TCP/IPVlan URLUSB UTPWPA WDSWisp Wlan802.11 Yagi antennaTechnical Support