SMC Networks SMCWBR14-N2 manual Port Forwarding Fields Name, TCP Ports To Open, UDP Ports To Open

Page 33

Port Forwarding Fields

Name

Give the rule a name that is meaningful to you, for example Game Server. You can also select from a list of popular games, and many of the remaining configuration values will be filled in accordingly. However, you should check whether the port values have changed since this list was created, and you must fill in the IP address field.

IP Address

Enter the local network IP address of the system hosting the server, for example 192.168.2.50.

TCP Ports To Open

Enter the TCP ports to open (for example 6159-6180, 99).

UDP Ports To Open

Enter the UDP ports to open (for example 6159-6180, 99).

Inbound Filter

Select a filter that controls access as needed for this rule. If you do not see the filter you need in the list of filters, go to the Advanced → Inbound Filter screen and create a new filter.

Schedule

Select a schedule for the times when this rule is in effect. If you do not see the schedule you need in the list of schedules, go to the Tools → Schedules screen and create a new schedule.

With the above example values filled in and this Gaming Rule enabled, all TCP and UDP traffic on ports 6159 through 6180 and port 99 is passed through the router and redirected to the Internal Private IP Address of your Game Server at 192.168.2.50.

Edit/Add Game Rule

Here you can add entries to the Game Rules List below, or edit existing entries.

Enable

Each entry in Game Rules List can be active (enabled) or inactive (disabled)

Save

Saves the new or edited Game Rule in the following list. When finished updating the game rules, you must still click the Save Settings button at the top of the page to make the changes effective and permanent.

Game Rules List

The section shows the currently defined game rules. A game rule can be changed by clicking the Edit icon, or deleted by clicking the Delete icon. When you click the Edit icon, the item is highlighted, and the "Edit Game Rule" section is activated for editing.

30

Image 33
Contents User Guide Limited Warranty Page Important Note CE Mark Declaration of Conformance for EMI and Safety EECFCC Radiation Exposure Statement IiiTable of Contents SMCWBR14-N2 Package Contents AD-HOCIBSS Network Wireless LAN NetworkingChannel for each station Page Roaming in an ESS network diagram Introduction Hardware Overview Front Panel LED’s Getting Started ¾ Click Log Using the Configuration MenuBasicInternet BasicBasicWireless Wireless Network Name Enable WirelessEnable Auto Channel Scan Wireless ChannelExample WEPWPA-Personal and WPA-Enterprise WPA-PersonalAdvanced Optional Backup Radius Server BasicNetwork Settings Enable RIP Router SettingsRIP Operating mode IP AddressAllow RIP updates from WAN Act as default routerRIP Password Dhcp Server SettingsAlways Broadcast Dhcp Lease TimeAdd/Edit Dhcp Reservation Computer NameNumber of Dynamic Dhcp Clients Dhcp Reservations ListRevoke ReserveAdvancedVirtual Server AdvancedProtocol Virtual Server Parameters NamePrivate Port Public PortSchedule EnableAdd/Edit Virtual Server SaveAdvancedSpecial Applications Parameters for an Application Rule ExampleApplication Trigger Protocol Trigger Port RangeInput Port Range Input ProtocolAdvancedGaming TCP Ports To Open Port Forwarding Fields NameUDP Ports To Open Edit/Add Game RuleAdvancedStreamEngine StreamEngine Setup Enable StreamEngineDynamic Fragmentation Automatic ClassificationAutomatic Uplink Speed Measured Uplink SpeedPriority Add/Edit StreamEngine Rule EnableSource IP Range Source Port RangeAdd/Edit Route AdvancedRoutingRoutes List AdvancedAccess Control Policy WizardAdd Policy Policy Table AdvancedWEB Filter Web Filter Parameters Web SiteAdd/Edit Web Site Allowed Web Site List Filter Settings Mode Enable MAC Address FilterFilter Wireless Clients AdvancedMAC Address FilterFilter Wired Clients Add/Edit MAC AddressMAC Address List AdvancedFirewall NAT Endpoint Filtering Firewall Settings Enable SPIEndpoint Independent Address RestrictedEnable DMZ DMZ HostDMZ IP Address Rtsp PptpNetmeeting FTPSIP Wake-On-LANAdvancedInbound Filter Action Add/Edit Inbound Filter RuleInbound Filter Rules List Allow AllAdvancedAdvanced Wireless WMM Enable 802.11d EnableExtra Wireless Protection WDS EnableEnable WAN Ping Respond Enable UPnPAdvancedNetwork UPnPAdvancedWISH Enable Multicast StreamsWAN Port Speed Multicast StreamsHttp WishHost 1 IP Range Save/UpdateHost 1 Port Range Host 2 IP RangeWi-Fi Protected Setup Enable AdvancedWi-Fi Protected SetupLock Wireless Security Settings PIN SettingsAdd Wireless Device Wizard Reset PIN to DefaultCurrent PIN Generate New PINTools ToolsAdminUser Password Admin PasswordEnable Remote Management Remote Admin PortEnable Daylight Saving Time Configuration Current Router TimeToolsTime Time ZoneDaylight Saving Offset Automatic Time Configuration Enable NTP ServerDST Start and DST End NTP Server UsedEnable Logging to Syslog Server ToolsSyslogSyslog Server IP Address ToolsEmail Settings Verify Password Email Log When Full or on Schedule On Log FullOn Schedule Load Settings From Local Hard Drive Save Settings To Local Hard DriveRestore To Factory Default Settings Reboot The DeviceToolsFirmware Firmware UpgradeFirmware Information Check OnlineUpload ToolsDynamic DNS Timeout ToolsSystem Check ToolsSchedules Schedule Rules List Statistics and Active Sessions StatusDevice infoPPPoE, PPTP, L2TP Connection Dhcp ConnectionBigPond Connection LAN ComputersStatusWireless SignalRate StatusRouting StatusLogs Apply Log Settings NowWhat to View View LevelsRefresh Email NowSave Log StatusStatistics Internal StatusActive SessionsExternal NATDir StatusWISH SessionsOut Time OutTarget OriginatorEstablished or closing TCP connections Ascii AdslBootp CAT DMZ DhcpDNS DSLEAP GUI Icmp HttpsIeee IgmpISP IPXLED LANLPR/LPD L2TPMIB MdixMppe MTUNTP NICOfdm OSIPPP RadiusRIP Smtp RSASnmp SohoTCP SsidTCP/IP TftpUSB URLUTP VlanWisp WDSWlan WPA802.11 Yagi antennaTechnical Support