Seagate ST9900605SS, ST9900805SS, ST9900705SS, ST9600005SS manual Installation, Physical interface

Page 60

11.0Installation

Savvio disc drive installation is a plug-and-play process. There are no jumpers, switches, or terminators on the drive.

SAS drives are designed to be used in a host system that provides a SAS-compatible backplane with bays designed to accommodate the drive. In such systems, the host system typically provides a carrier or tray into which you need to mount the drive. Mount the drive to the carrier or tray provided by the host system using four M3 x 0.5 metric screws. When tightening the screws, use a maximum torque of 4.5 in-lb +/- 0.45 in-lb. Do not over-tighten or force the screws. You can mount the drive in any orientation.

Note. SAS drives are designed to be attached to the host system without I/O or power cables. If you intend to use the drive in a non-backplane host system, connecting the drive using high-quality cables is acceptable as long as the I/O cable length does not exceed 10 meters (32.8 feet).

Slide the carrier or tray into the appropriate bay in your host system using the instructions provided by the host system. This connects the drive directly to your system’s SAS connector. The SAS connector is normally located on a SAS backpanel. See Section 12.4.1 for additional information about these connectors.

Power is supplied through the SAS connector.

The drive is shipped from the factory low-level formatted in 512-byte logical blocks. You need to reformat the drive only if you want to select a different logical block size.

Figure 17. Physical interface

Note. Image is for reference only, may not represent actual drive.

52	Savvio 10K.5 SAS Product Manual, Rev. D

Image 60

Contents ST9900605SS ST9600005SS ST9450205SS ST9300405SS Standard Models Self-Encrypting Drive ModelsSED Fips 140-2 Models Revision history Revision Date Sheets affected or commentsContents Defect and error management InstallationAbout Fips About self-encrypting drives Interface requirementsPage Savvio 10K.5 SAS Product Manual, Rev. D List of Figures Page Seagate Technology support services Seagate Online Support and ServicesScope Standard models Standard SED models SED Fips 140-2 modelsApplicable standards and reference documentation StandardsElectromagnetic compatibility Electromagnetic susceptibilityElectromagnetic compliance Electromagnetic compliance for the European UnionAustralian C-Tick Korean KCCReference documents China Restriction of Hazardous Substances RoHS DirectiveGeneral description Standard features Media descriptionPerformance Factory-installed options ReliabilityFormatted capacities Programmable drive capacityPerformance characteristics Internal drive characteristicsSeek performance characteristics Access timeGeneral performance characteristics Start/stop timePrefetch/multi-segmented cache control Cache operationCaching write data Prefetch operationReliability specifications Error ratesRecoverable Errors Unrecoverable ErrorsReliability and service Seek errorsInterface errors Preventive maintenance4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Reporting controlTemperature Log Page 0Dh Parameter Code Description Predictive failuresThermal monitor State of the drive prior to testing Drive Self Test DSTDST failure definition ImplementationShort and extended tests Short test Function Code 001bExtended test Function Code 010b Log page entriesProduct warranty ShippingStorage Product repair and return informationPhysical/electrical specifications PowerChoiceTM power managementPowerChoice modes Mode DescriptionAC power requirements DC power requirements900GB standard drive DC power requirements 0Gb mode Amps600GB standard drive DC power requirements 450GB standard model DC power requirements 300GB standard model DC power requirements General DC power requirement notes Power sequencingConducted noise immunity Current profiles Current profiles for 900GB modelsCurrent profiles for 600GB models Current profiles for 450GB models Current profiles for 300GB models Power dissipation GB models in 3Gb operation900GB models in 6Gb operation GB models in 3Gb operation 600GB models in 6Gb operation 450GB models in 3Gb operation 450GB models in 6Gb operation 300GB models in 3Gb operation Temperature a. Operating Environmental limits300GB models in 6Gb operation Relative humidity Effective altitude sea level a. OperatingShock and vibration Shock Recommended mountingAir cleanliness Vibration a. Operating-normalCorrosive environment Acoustics Mechanical specifications Mounting configuration dimensionsAbout Fips PurposeLevel 2 security Controlled access Admin SPAbout self-encrypting drives Data encryptionRandom number generator RNG Drive lockingData bands Cryptographic eraseAuthenticated firmware download Power requirementsSupported commands RevertSPDefect and error management Drive internal defects/errorsDrive error recovery procedures SAS system errors Background Media ScanMedia Pre-Scan Deferred Auto-ReallocationIdle Read After Write Setting and determining the current Type Level Protection Information PILevels of PI Identifying a Protection Information driveInstallation Physical interfaceDrive orientation CoolingDrive mounting GroundingSAS features Interface requirementsScsi commands supported Supported commandsCommand name Command code Supported Dual port supportSupported commands Supported commands Supported commands Inquiry data Savvio inquiry dataBytes Data hex Mode Sense data Mode Sense data for 900GB drives Mode PagesMode Sense data for 600GB drives Mode Sense values for 450GB drives Mode Sense values for 300GB drives Miscellaneous operating features and conditions Miscellaneous featuresSupported Feature or condition Miscellaneous statusSAS physical interface Datum B Section C C Section a a Physical characteristics Connector requirementsElectrical description Pin descriptionsSignal characteristics PowerSAS transmitters and receivers Ready LED OutSAS-2 Specification compliance LED drive signalDifferential signals General interface characteristicsIndex NumericsPage Msid Mtbf See also cooling Page Savvio 10K.5 SAS Product Manual, Rev. D Page Seagate Technology LLC