Seagate ST39173N/W/WD/LW/WC/LC, ST34573N/W/WD/LW/WC/LC manual Drive characteristics, Rpm

Page 18

16

Barracuda 9LP Installation Guide, Rev. E

Table 1.

Drive characteristics

 

Interface

 

UltraSCSI [1]

 

Capacity

 

Formatted [2]

Max. data blocks [2]

ST39173

 

9.105 Gbyte [2]

10F59C7h [2]

ST34573

 

4.551 Gbyte [2]

87A25Bh [2]

Recording

 

 

 

Cylinders (user)

7,501

 

Read/write data heads

 

 

ST39173

10

 

ST34573

5

 

Access time [3]

 

 

Average read

7.4 msec

 

Average write

8.2 msec

 

Disk rotation

 

 

RPM

 

7,200 r/min

 

Average latency

4.17 msec

 

Internal transfer rate (variable with zone)

 

ST39173

 

120–190 Mbits/sec

ST34573

 

120–190 Mbits/sec

Maximum synchronous SCSI transfer rate

 

N model

 

20 Mbytes/sec

 

W/WD/WC/DC models

40 Mbytes/sec

 

LW/LC

 

80 Mbytes/sec

 

[1]Can also be operated according to SCSI-1 and SCSI-2 protocols. Referred to also as “SCSI Fast-20.”

[2]Standard factory units are formatted 512 data bytes per sector with spare tracks reserved for reallocating bad sectors.

[3]Includes controller overhead.

Image 18
Contents ST39173N/W/WD/LW/WC/LC ST34573N/W/WD/LW/WC/LC Contents Preface Electrostatic discharge protectionImportant safety information and precautions Page Wichtige Sicherheitshinweise Page Barracuda 9LP Installation Guide, Rev. E Regulatory agency compliance Electromagnetic susceptibilityElectromagnetic compliance Electromagnetic compliance for the European Union Australian C-TickSeagate Technology support services Presales Support Customer Service CSO European Support Services Africa/Middle East Support Services 14Barracuda 9LP Installation Guide, Rev. E General description Drive characteristics RPMDC power requirements Amps, single-ended ST39173N/W/WC DCXDCX DC power requirements Amps, multimode ST39173LW/LC ST34573LW/LCDimensions of the drive Drive models General informationScsi ID jumpers Drive termination Terminator power Circuits and data path widthsCable characteristics for single-ended I/O circuits Cable characteristics for differential I/O circuits Fifty pin I/O connection to drive Multiple drive connection to host adapter Multiple-drive connection to host adapter Barracuda 9LP Installation Guide, Rev. E Providing adequate cooling Kühlung des Systems Suggested air flow Abbildung 4. Empfohlener Luftstromverlauf Mounting the drive and connecting cables Installation des Laufwerkes und Anschluß der KabelPage DC power connector Abbildung 5. Gleichstromanschluß Hinweis Barracuda 9LP Installation Guide, Rev. E Mounting configuration dimensions Formatting the drive Quick reference desktop system notes Setting the Scsi ID jumpers DrivesTerminating the drive Terminating the driveSetting terminator power jumpers Other applicable jumper options Additional jumper optionsSetting the Scsi ID on model W/WD drives WD/LW drivesHost Alternate WD drives Terminating the drive W model shownWD model drives Additional jumper options for W, WD, and LW drives LW drives Additional jumper option for LW drivesWC/LC drives WC drives Applicable jumper optionsLC drives Jumper options for LC drivesAdditional jumper options for LC drives Page