Western Telematic IPS-800CE-D16, IPS-1600CE-D16 manual Serial Parameters Menu

Page 27

Confi guration

Figure 5.5: Serial Parameters Menu - Web Browser Interface

SERIAL PARAMETERS:

 

1.

Baud Rate:

9600

2.

Data:

8 Bit

3.

Parity:

None

4.

Stop:

1 Bit

5.

Port Mode:

Console

6.

Modem Init. Str: ATE0M0Q1&C1&D2S0=1

Enter selection,

Press <ESC> to return to previous menu ...

Figure 5.6: Serial Parameters Menu - Text Interface

5.3.2.The Serial Parameters Menu

The Serial Parameters Menus are used to configure the IPS's serial COM Port, and allow you to select parameters such as the Baud Rate, Parity and Modem Initialization String. To access the Serial Parameters Menu, proceed as follows:

Web Browser Interface: Click the "Setup" button to access the Setup Menus, and then click the "Serial Parameters" button. The Serial Parameters Menu will be displayed as shown in Figure 5.5.

Text Interface: Type /C and press [Enter]. The Serial Parameters Menu will be displayed as shown in Figure 5.6.

5-9

Image 27
Contents User’s Guide IPS-800CE-D16 IPS-1600CE-D16Page Installation Instructions EMC, Safety, and R&TTE Directive Compliance Table of Contents List of Figures Introduction Typographic Conventions IPS-800CE-D16 and IPS-1600CE-D16 UnitsIPS-800CE-D16 Back Panel 8-Plug Unit Unit DescriptionIPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Hardware Installation Apply Power to the IPSQuick Start Connect your PC to the IPS Communicating with the IPSText Interface Text Interface Type /X and press Enter Installation Power Supply ConnectionInstalling the Cable Keepers Serial COM / RS232 Port Connection Connection to Switched OutletsConnecting the Network Cable Connecting a Local PCConnecting an External Modem IPS-800CE-D16 & IPS-1600CE-D16 User’s Guide System Mode and User Mode ConfigurationPlug Status Screen Web Browser Interface IPS-800CE-D16 Shown Accessing the Web Browser InterfaceAccessing the Text Interface $ telnet 192.168.168.168 Enter Configuration Menus General Parameters Menu Web Browser Interface General Parameters MenusGeneral Parameters Menu Text Interface IPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Serial Parameters Serial Parameters MenuIPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Plug #1 Parameters Plug Parameters MenusPlug Passwords and Co-Location Features Reboot Cycles Network Parameters Menu Web Browser Interface Network Parameters Menus IP Security Feature Confi guration 12 Telnet Parameters Menu Web Browser Interface Telnet Parameters Menus14 Web Server Parameters Menu Web Browser Interface Web Server Parameters MenusSave Configuration Parameters Operation Operation via the Web Browser InterfacePlug Status Screen Web Browser Interface Plug Status Menu Web Browser Interface IPS-800CE-D16 Shown Plug Status Screen Text Interface Operation via the Text InterfaceIPS Help Screen Text Interface Switching and Reboot Commands Text InterfaceBoot 1 or /BO Atmswtch Applying Commands to Several Plugs Text Interface Logging Out of Command ModeAutomated Mode Manual Operation Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Upgrading the IPS Firmware IPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Interface Description Serial COM / RS232 Port InterfaceApx-1 Apx-2 SpecificationsApx-3 Customer ServiceApx-4 Trademark and Copyright InformationIndex-1 IndexIPS-800/1600-D20 Series User’s Guide Index-2Page Sterling Irvine California 949 586-9950 Toll Free