IPS-800CE-D16 & IPS-1600CE-D16 - User’s Guide
Internet Power Switch v1.41h | Site ID: (undefined) |
| |||||
Display |
| Display Help Screen |
|
| Configuration | ||
/H |
|
|
|
| /G | View/Set General Parameters | |
/S |
|
| Display Plug Status |
|
| /P [n] | View/Set Plug Parameters |
/SN |
|
| Display Network Status |
| /C | View/Set Serial Parameters | |
Control |
|
|
|
| /N | View/Set Network Parameters | |
| Set Plugs to Default |
|
| /T | View/set Telnet Parameters | ||
/D |
|
|
|
| /W | View/Set Web Server | |
/Boot <n> | Boot Plug n |
|
| /E | Save Parameters | ||
/On <n> |
| Turn On Plug n |
|
| /R | Recall Parameters | |
/Off <n> | Turn Off Plug n |
|
| /DL | Download Parameters to File | ||
/X |
|
| Exit/Disconnect |
|
| Utilities |
|
|
|
| + | Reset Network Interface | |||
|
|
| /I | ||||
[n] = | optional plug name or number | /U | Upgrade Firmware | ||||
<n> = | required plug name or number |
|
| ||||
n+n or n n = plug n and plug n |
|
|
| ||||
n:n = | plug n through plug n |
|
|
| |||
* | = | all plugs |
|
|
| ||
,y | = | bypass “Sure? (y/n)” |
|
|
| ||
|
|
| + |
|
| ||
IPS>
Figure 6.3: The IPS Help Screen - Text Interface
6.2.2.Switching and Reboot Commands - Text Interface
These commands can be used to switch or reboot the IPS’s switched plugs, and can also be used to set plugs to the
Notes:
•Wait for the "IPS>" prompt to appear before entering commands. The prompt will not reappear until the previous command is complete.
•Commands are not case sensitive. All commands are invoked by pressing [Enter].
•Users who login to command mode using a Plug password, will only be allowed to issue commands to the plugs allowed by that password.
•If command confirmation is enabled, the IPS will display the Status Screen after commands are successfully completed.
•When switching and reboot operations are initiated, Boot/Sequence Delay times will be applied as described in Section 5.3.3.2.