Western Telematic IPS-800CE-D16, IPS-1600CE-D16 manual Plug Parameters Menus, Plug #1 Parameters

Page 29

Conﬁ guration

Figure 5.7: Plug Parameters Menu - Web Browser Interface

PLUG #1 PARAMETERS:

1.Plug Name:

2.Password:(undeﬁned)

3.Boot/Seq. Delay: 0.5 Secs

4.Power Up Default: On(undeﬁned)

Enter Selection,

Press <ESC> to Exit ...

Figure 5.8: Plug Parameters Menu - Text Interface (Plug 1 Shown)

5.3.3.Plug Parameters Menus

The Plug Parameters Menus are used to deﬁne Plug Names, Plug Passwords, boot/sequence delay times and Power Up Default values for each of the IPS’s Switched AC Outlets.

•Web Browser Interface: Click the "Setup" button to access the conﬁguration menus, then click the "Plug Parameters" button. The Plug Parameters Menu will be displayed as shown in Figure 5.7.

•Text Interface: Type /P n and then press [Enter] (Where n is the number or name of the plug you wish to conﬁgure.) The Plug Parameters Menu will be displayed as shown in Figure 5.8.

Note that in this case, the major difference between the Web Browser Interface and Text Interface is that the Web Browser Interface allows you to select parameters for all plugs from a single menu, whereas the Text Interface includes a separate menu for each plug.

5-11

Image 29

Contents User’s Guide IPS-800CE-D16 IPS-1600CE-D16Page Installation Instructions EMC, Safety, and R&TTE Directive Compliance Table of Contents List of Figures Introduction Typographic Conventions IPS-800CE-D16 and IPS-1600CE-D16 UnitsIPS-800CE-D16 Back Panel 8-Plug Unit Unit DescriptionIPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Quick Start Hardware InstallationApply Power to the IPS Connect your PC to the IPS Communicating with the IPSText Interface Text Interface Type /X and press Enter Installing the Cable Keepers InstallationPower Supply Connection Serial COM / RS232 Port Connection Connection to Switched OutletsConnecting an External Modem Connecting the Network CableConnecting a Local PC IPS-800CE-D16 & IPS-1600CE-D16 User’s Guide System Mode and User Mode ConfigurationPlug Status Screen Web Browser Interface IPS-800CE-D16 Shown Accessing the Web Browser InterfaceAccessing the Text Interface $ telnet 192.168.168.168 Enter Configuration Menus General Parameters Menu Web Browser Interface General Parameters MenusGeneral Parameters Menu Text Interface IPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Serial Parameters Serial Parameters MenuIPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Plug #1 Parameters Plug Parameters MenusPlug Passwords and Co-Location Features Reboot Cycles Network Parameters Menu Web Browser Interface Network Parameters Menus IP Security Feature Conﬁ guration 12 Telnet Parameters Menu Web Browser Interface Telnet Parameters Menus14 Web Server Parameters Menu Web Browser Interface Web Server Parameters MenusSave Configuration Parameters Plug Status Screen Web Browser Interface OperationOperation via the Web Browser Interface Plug Status Menu Web Browser Interface IPS-800CE-D16 Shown Plug Status Screen Text Interface Operation via the Text InterfaceIPS Help Screen Text Interface Switching and Reboot Commands Text InterfaceBoot 1 or /BO Atmswtch Applying Commands to Several Plugs Text Interface Logging Out of Command ModeAutomated Mode Manual Operation Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters Upgrading the IPS Firmware IPS-800CE-D16 & IPS-1600CE-D16 User’s Guide Apx-1 Interface DescriptionSerial COM / RS232 Port Interface Apx-2 SpecificationsApx-3 Customer ServiceApx-4 Trademark and Copyright InformationIndex-1 IndexIPS-800/1600-D20 Series User’s Guide Index-2Page Sterling Irvine California 949 586-9950 Toll Free