Western Telematic APS-16M, APS-8M manual Edit Password Directory

Page 21

Configuration

EDIT PASSWORD DIRECTORY:

1.Add Name/Password

2.Edit/Delete from List

3.Edit/Delete from Search

4.Delete Entire Directory

Enter: #<CR> to select,

<ESC> for previous menu ...

Figure 5.2: The Edit Password Directory Menu

5.4.1.The Password Directory

APS-8/16M passwords are defined using the "Edit Password Directory" menu, which is accessed via the System Parameters menu (/F). In addition to assigning command level privileges to each password, the Edit Password Directory function also allows you to determine which ports each password will be allowed to access, and includes prompts that are used to configure several Dial Back parameters. The Password Directory allows for the definition of up to 32 separate passwords.

Note:

The Edit Password Directory menu is only available to users who have logged into command mode using a password that permits access to Supervisor Mode.

The /V command can also be issued to view the Password Directory.

To activate the Edit Password Directory menu, you must first access the command mode, and then type /F and press [Enter] to display the System Parameters Menu. At the System Parameters Menu, type 5 and press [Enter] to display the Edit Password Directory menu (Figure 5.2.) The Edit Password Directory Menu offers the following options:

1.Add Name/Password: Creates new passwords and assigns Supervisor Mode access and port access rights as described in Section 5.4.1.1.

2.Edit/Delete from List: Edits/Deletes passwords. The desired password is selected by scrolling through a list of all passwords as described in Section 5.4.1.2.

3.Edit/Delete from Search: Edits/Deletes passwords. The desired password is selected using a search function as described in Section 5.4.1.2.

4.Delete Entire Directory: Clears the password directory, and deletes all existing passwords as described in Section 5.4.1.3.

5-5

Image 21
Contents Models Covered User’s GuidePage Secure Racking Input SupplyGrounding Shock Hazard Do Not Enter Disconnect PowerTable of Contents List of Figures Introduction Modem Communication Configuration BackupAPS-8M and APS-16M Units Typographic ConventionsFront Panel Unit DescriptionBack Panel  Power SwitchHardware Installation Getting StartedConnect your Equipment to the Serial Ports Communicating with the APS-8/16M Access Command ModePort Status Screen Model APS-8M Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Connecting Power to the APS Unit Hardware InstallationAC Powered Units DC Powered UnitsConnect a Telco Line to the Modem Port Connecting Devices to the APS Serial PortsAccess to the APS-8/16M Command Mode ConfigurationPassword Functions System SetUp PortsSystem Parameters Menu System Parameters Menu /F Edit Password Directory Password DirectoryAdding Passwords Editing and Deleting Passwords Dial Back Function Deleting the Entire Password DirectoryAdd Name/Password Menu Dial Back ExampleSystem Parameters Menu Configuration Conventions Port ConfigurationPort Modes RTS/CTS 3. RS232 Port Configuration MenusConfiguration Port Parameters Menu Modem Mode Port 3 Shown Configuration APS-8M / APS-16M Asynchronous Port Switches User’s Guide Invalid Access Lockout Feature Copy Port Parameters Copying Parameters to All PortsSave User Selected Parameters APS-8M / APS-16M Asynchronous Port Switches User’s Guide Communicating with the Internal Modem Internal ModemCommon AT Commands Command Function/OptionsDial String Modifiers Data Terminal Ready DTR Control Command Function/Options Port Status Screen /S Status ScreensPort Diagnostics Screen /SD Port Diagnostics Screen Model APS-8M Defaults Shown Port Parameters Screens /W Password Directory Screen /VPassword Directory Screen Sample Values Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Any-to-Any Mode OperationPort Connection and Disconnection Enter Disconnecting PortsThree Characters Uses the format EnterLLLEnter, where Server Enter Defining Hunt GroupsHunt Group Example Buffer Mode Passive ModeXx Enter Reading Data from Buffer Mode PortsPort Buffers Modem ModeOperation APS-8M / APS-16M Asynchronous Port Switches User’s Guide Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters 10-1 Upgrading APS-8/16M Firmware10-2 Command Reference Guide Command Conventions11-1 11-2 Command Response11-3 Command SummaryFormat Response Command SetTerse 11-4Format /C x x Enter Format /CP Enter11-5 2 Enter or /D/Y 3 Enter Format /D/Y x x EnterFormat /E/Y x x Enter 11-6Format /H Enter Format /F EnterFormat /I/Y Enter 11-7Format /S Enter Format /P x EnterFormat /SD Enter 11-8Format /UF Enter Format /U EnterFormat /UL Enter Format /V EnterFormat /W x Enter Format /X Enter11-10 Apx-1 RS232 Port InterfacePower SpecificationsRS232 Port Interface Stop Bits 1 orApx-3 Customer ServiceTrademark and Copyright Information Trademarks Used in this ManualApx-4 Apx-5 Regulatory StatementsApx-6 EMC, Safety, and R&TTE Directive ComplianceIndex-1 IndexIndex-2 Index Index-3Index-4 Page Sterling Irvine California 949 586-9950 Toll Free