Western Telematic APS-16M manual Port Diagnostics Screen Model APS-8M Defaults Shown

Page 43

The Status Screens

PORT

DIAGNOSTICS: APS-M, Version

3.0, Site ID: (undeﬁned)

PORT

NAME

STATUS

BAUD

COM HS

MODE

BUF

CTS

-----+

------------------

+--------

+--------

9600

+-----

+------

+--------

Any

+-------

0

+----

H

01

(undeﬁned)

*Free

8N1 RTS

02

(undeﬁned)

Free

9600

8N1 RTS

Any

0

H

03

(undeﬁned)

Free

9600

8N1 RTS

Any

0

L

04

(undeﬁned)

Free

9600

8N1 RTS

Any

0

L

05

(undeﬁned)

Free

9600

8N1 RTS

Any

0

L

06

(undeﬁned)

Free

9600

8N1

RTS

Any

0

L

07

(undeﬁned)

Free

9600

8N1

RTS

Any

0

L

08

Internal_Modem

Free

9600

8N1

RTS

Modem

0

H

Enter /H for command menu.

APS>

Figure 7.2: The Port Diagnostics Screen (Model APS-8M; Defaults Shown)

As shown in Figure 7.2, the Port Diagnostics Screen lists the following:

•Port: The Port Number.

•Name: The user-deﬁned name for each port.

•Status: The connect status for each port. When the port is connected, this column will list the number of the other port that is connected to this port. Note that if this column contains an asterisk, this indicates that the port has accessed command mode.

•Baud: The baud rate selected for each port.

•COM: The Data Bits, Parity, and Stop Bits selected for each port. For example, "8N1" indicates Eight data bits, No parity, and One stop bit.

•HS: The handshaking (ﬂow control) mode for each port.

•Mode: The user-selected Port Mode. This column will read Any (Any- to-Any), Modem, Passive, or Buffer, depending on the conﬁguration selected for each port.

•BUF: Lists the amount of data (in bytes) currently stored in the buffer for this port.

•CTS: The High/Low status of the CTS line at the RS232 interface.

7-3

Image 43

Contents Models Covered User’s GuidePage Input Supply Secure RackingGrounding Shock Hazard Do Not Enter Disconnect PowerTable of Contents List of Figures Introduction Typographic Conventions Configuration BackupModem Communication APS-8M and APS-16M UnitsFront Panel Unit DescriptionBack Panel  Power SwitchGetting Started Hardware InstallationConnect your Equipment to the Serial Ports Communicating with the APS-8/16M Access Command ModePort Status Screen Model APS-8M Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide DC Powered Units Hardware InstallationConnecting Power to the APS Unit AC Powered UnitsConnect a Telco Line to the Modem Port Connecting Devices to the APS Serial PortsAccess to the APS-8/16M Command Mode ConfigurationPassword Functions System SetUp PortsSystem Parameters Menu System Parameters Menu /F Edit Password Directory Password DirectoryAdding Passwords Editing and Deleting Passwords Dial Back Function Deleting the Entire Password DirectoryDial Back Example Add Name/Password MenuSystem Parameters Menu Configuration Conventions Port ConfigurationPort Modes RTS/CTS 3. RS232 Port Configuration MenusConﬁguration Port Parameters Menu Modem Mode Port 3 Shown Conﬁguration APS-8M / APS-16M Asynchronous Port Switches User’s Guide Invalid Access Lockout Feature Copy Port Parameters Copying Parameters to All PortsSave User Selected Parameters APS-8M / APS-16M Asynchronous Port Switches User’s Guide Communicating with the Internal Modem Internal ModemCommand Function/Options Common AT CommandsDial String Modiﬁers Data Terminal Ready DTR Control Command Function/Options Port Status Screen /S Status ScreensPort Diagnostics Screen /SD Port Diagnostics Screen Model APS-8M Defaults Shown Port Parameters Screens /W Password Directory Screen /VPassword Directory Screen Sample Values Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Operation Any-to-Any ModePort Connection and Disconnection Enter Disconnecting PortsThree Characters Uses the format EnterLLLEnter, where Server Enter Defining Hunt GroupsHunt Group Example Buffer Mode Passive ModeXx Enter Reading Data from Buffer Mode PortsPort Buffers Modem ModeOperation APS-8M / APS-16M Asynchronous Port Switches User’s Guide Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters 10-1 Upgrading APS-8/16M Firmware10-2 Command Conventions Command Reference Guide11-1 11-2 Command Response11-3 Command Summary11-4 Command SetFormat Response TerseFormat /CP Enter Format /C x x Enter11-5 11-6 Format /D/Y x x Enter2 Enter or /D/Y 3 Enter Format /E/Y x x Enter11-7 Format /F EnterFormat /H Enter Format /I/Y Enter11-8 Format /P x EnterFormat /S Enter Format /SD EnterFormat /V Enter Format /U EnterFormat /UF Enter Format /UL EnterFormat /X Enter Format /W x Enter11-10 Apx-1 RS232 Port InterfaceStop Bits 1 or SpecificationsPower RS232 Port InterfaceApx-3 Customer ServiceTrademarks Used in this Manual Trademark and Copyright InformationApx-4 Apx-5 Regulatory StatementsApx-6 EMC, Safety, and R&TTE Directive ComplianceIndex-1 IndexIndex-2 Index Index-3Index-4 Page Sterling Irvine California 949 586-9950 Toll Free