Western Telematic APS-16M, APS-8M manual Format /C x x Enter, Format /CP Enter, 11-5

Page 65

Command Reference Guide

/C Connect

Establishes a bidirectional connection between two ports. For more information and command line examples, please refer to Section 8.1. There are two types of port connections:

•Resident Connect: If the /C command speciﬁes one port name or number, your resident port will be connected to the speciﬁed port.

•Third Party Connect: If the /C command speciﬁes two port names or numbers, the unit will connect the two ports indicated. A Third Party Connect command must be issued from a third port where Supervisor Mode is active. Passwords and ports that do not permit Supervisor Mode cannot initiate a Third Party Connect.

Note:

•Passwords and ports that do not permit Supervisor Mode can only connect to the ports that are speciﬁcally allowed by the password entered at log in.

•Passwords and ports that permit Supervisor Mode can connect to any free APS-8/16M port.

Availability: Supervisor Mode / Non-Supervisor Mode

Format: /C <x> [x] [Enter]

Where x is the number or name of the port(s) to be connected.

Response:

Verbose: Connected xx, when a Resident Connection is initiated, the APS-8/16M will also display the currently selected Resident Disconnect Sequence for your port.

Terse: 1

/CP Copy RS232 Port Parameters

Allows quick set-up when all RS232 ports will be conﬁgured with the same or similar parameters. When the /CP command is invoked, the APS-8/16M will display a menu that is used to select common port parameters, which can then be copied to all APS-8/16M RS232 ports. Note that the Copy Command will not change restricted parameters at Ports 1 and 2 or the Internal Modem Port. For more information, please refer to Section 5.6.

Availability: Supervisor Mode Only

Format: /CP [Enter]

Response: Displays Copy Parameters Menu

11-5

Image 65

Contents Models Covered User’s GuidePage Grounding Secure RackingInput Supply Shock Hazard Do Not Enter Disconnect PowerTable of Contents List of Figures Introduction Modem Communication Configuration BackupAPS-8M and APS-16M Units Typographic ConventionsFront Panel Unit DescriptionBack Panel  Power SwitchConnect your Equipment to the Serial Ports Hardware InstallationGetting Started Communicating with the APS-8/16M Access Command ModePort Status Screen Model APS-8M Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Connecting Power to the APS Unit Hardware InstallationAC Powered Units DC Powered UnitsConnect a Telco Line to the Modem Port Connecting Devices to the APS Serial PortsAccess to the APS-8/16M Command Mode ConfigurationPassword Functions System SetUp PortsSystem Parameters Menu System Parameters Menu /F Edit Password Directory Password DirectoryAdding Passwords Editing and Deleting Passwords Dial Back Function Deleting the Entire Password DirectorySystem Parameters Menu Add Name/Password MenuDial Back Example Configuration Conventions Port ConfigurationPort Modes RTS/CTS 3. RS232 Port Configuration MenusConﬁguration Port Parameters Menu Modem Mode Port 3 Shown Conﬁguration APS-8M / APS-16M Asynchronous Port Switches User’s Guide Invalid Access Lockout Feature Copy Port Parameters Copying Parameters to All PortsSave User Selected Parameters APS-8M / APS-16M Asynchronous Port Switches User’s Guide Communicating with the Internal Modem Internal ModemDial String Modiﬁers Common AT CommandsCommand Function/Options Data Terminal Ready DTR Control Command Function/Options Port Status Screen /S Status ScreensPort Diagnostics Screen /SD Port Diagnostics Screen Model APS-8M Defaults Shown Port Parameters Screens /W Password Directory Screen /VPassword Directory Screen Sample Values Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Port Connection and Disconnection Any-to-Any ModeOperation Enter Disconnecting PortsThree Characters Uses the format EnterLLLEnter, where Server Enter Defining Hunt GroupsHunt Group Example Buffer Mode Passive ModeXx Enter Reading Data from Buffer Mode PortsPort Buffers Modem ModeOperation APS-8M / APS-16M Asynchronous Port Switches User’s Guide Sending Parameters to a File Saving and Restoring Configuration ParametersRestoring Saved Parameters 10-1 Upgrading APS-8/16M Firmware10-2 11-1 Command Reference GuideCommand Conventions 11-2 Command Response11-3 Command SummaryFormat Response Command SetTerse 11-411-5 Format /C x x EnterFormat /CP Enter 2 Enter or /D/Y 3 Enter Format /D/Y x x EnterFormat /E/Y x x Enter 11-6Format /H Enter Format /F EnterFormat /I/Y Enter 11-7Format /S Enter Format /P x EnterFormat /SD Enter 11-8Format /UF Enter Format /U EnterFormat /UL Enter Format /V Enter11-10 Format /W x EnterFormat /X Enter Apx-1 RS232 Port InterfacePower SpecificationsRS232 Port Interface Stop Bits 1 orApx-3 Customer ServiceApx-4 Trademark and Copyright InformationTrademarks Used in this Manual Apx-5 Regulatory StatementsApx-6 EMC, Safety, and R&TTE Directive ComplianceIndex-1 IndexIndex-2 Index Index-3Index-4 Page Sterling Irvine California 949 586-9950 Toll Free