Western Telematic APS-8M, APS-16M manual Format /P x Enter, Format /S Enter, Format /SD Enter, 11-8

Page 68

APS-8M / APS-16M Asynchronous Port Switches; User’s Guide

/P Set RS232 Port Parameters

Displays a menu which allows the user to select options and parameters for the selected port. Section 5.5.3 describes the procedure for defining port parameters.

Availability: Supervisor Mode Only

Format: /P [x] [Enter]

Where x is the number or name of the port to be configured. If the port number or name is not specified, the APS-8/16M will display the configuration menu for your resident port.

Response: The Port Parameters Menu is displayed.

/S

Display Port Status

Displays the Port Status Screen, which lists current conditions and parameters for all ports. When the Supervisor Mode is active, the /S command will display the current status of all APS-8/16M Ports. If the Supervisor Mode is not active, then the /S command will only display status information for the ports that are specifically allowed by the password entered at log in. For more information on the Port Status Screen, please refer to Section 7.1.

Availability: Supervisor Mode / Non-Supervisor Mode

Format: /S [Enter]

Response: Displays Port Status Screen

/SD Display Port Diagnostics

Provides more detailed information regarding the operational status of each port. If your password and port permit Supervisor Mode, the /SD command will display status information for all APS-8/16M ports. However, if your password or port do not permit Supervisor Mode, then the /SD command will only display information for the ports specifically allowed by your password. For More information on the Port Diagnostics Screen, please refer to Section 7.2.

Availability: Supervisor Mode / Non-Supervisor Mode

Format: /SD [Enter]

Response: Displays Port Diagnostics Screen

11-8

Image 68
Contents User’s Guide Models CoveredPage Grounding Secure RackingInput Supply Disconnect Power Shock Hazard Do Not EnterTable of Contents List of Figures Introduction Configuration Backup Modem CommunicationAPS-8M and APS-16M Units Typographic ConventionsUnit Description Front Panel Power Switch Back PanelConnect your Equipment to the Serial Ports Hardware InstallationGetting Started Access Command Mode Communicating with the APS-8/16MPort Status Screen Model APS-8M Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Hardware Installation Connecting Power to the APS UnitAC Powered Units DC Powered UnitsConnecting Devices to the APS Serial Ports Connect a Telco Line to the Modem PortConfiguration Access to the APS-8/16M Command ModeSystem SetUp Ports Password FunctionsSystem Parameters Menu System Parameters Menu /F Password Directory Edit Password DirectoryAdding Passwords Editing and Deleting Passwords Deleting the Entire Password Directory Dial Back FunctionSystem Parameters Menu Add Name/Password MenuDial Back Example Port Configuration Configuration ConventionsPort Modes 3. RS232 Port Configuration Menus RTS/CTSConfiguration Port Parameters Menu Modem Mode Port 3 Shown Configuration APS-8M / APS-16M Asynchronous Port Switches User’s Guide Invalid Access Lockout Feature Copying Parameters to All Ports Copy Port ParametersSave User Selected Parameters APS-8M / APS-16M Asynchronous Port Switches User’s Guide Internal Modem Communicating with the Internal ModemDial String Modifiers Common AT CommandsCommand Function/Options Data Terminal Ready DTR Control Command Function/Options Status Screens Port Status Screen /SPort Diagnostics Screen /SD Port Diagnostics Screen Model APS-8M Defaults Shown Password Directory Screen /V Port Parameters Screens /WPassword Directory Screen Sample Values Shown APS-8M / APS-16M Asynchronous Port Switches User’s Guide Port Connection and Disconnection Any-to-Any ModeOperation Disconnecting Ports EnterThree Characters Uses the format EnterLLLEnter, where Defining Hunt Groups Server EnterHunt Group Example Passive Mode Buffer ModeReading Data from Buffer Mode Ports Xx EnterModem Mode Port BuffersOperation APS-8M / APS-16M Asynchronous Port Switches User’s Guide Saving and Restoring Configuration Parameters Sending Parameters to a FileRestoring Saved Parameters Upgrading APS-8/16M Firmware 10-110-2 11-1 Command Reference GuideCommand Conventions Command Response 11-2Command Summary 11-3Command Set Format ResponseTerse 11-411-5 Format /C x x EnterFormat /CP Enter Format /D/Y x x Enter 2 Enter or /D/Y 3 EnterFormat /E/Y x x Enter 11-6Format /F Enter Format /H EnterFormat /I/Y Enter 11-7Format /P x Enter Format /S EnterFormat /SD Enter 11-8Format /U Enter Format /UF EnterFormat /UL Enter Format /V Enter11-10 Format /W x EnterFormat /X Enter RS232 Port Interface Apx-1Specifications PowerRS232 Port Interface Stop Bits 1 orCustomer Service Apx-3Apx-4 Trademark and Copyright InformationTrademarks Used in this Manual Regulatory Statements Apx-5EMC, Safety, and R&TTE Directive Compliance Apx-6Index Index-1Index-2 Index-3 IndexIndex-4 Page Sterling Irvine California 949 586-9950 Toll Free