Source Connection

This step checks the connection of source components.

1 Use q/wto select one of the following options, and then press ENTER.

`Yes, Continue: Performs the checkings.

`No, Skip:

Skips this step and continues to “Remote Mode Setup”.

2 Select the input selector for which you want to check the connection and press ENTER.

The picture of the corresponding source should appear on screen with a verification prompt.

3 When prompted, use q/wto select one of the following options and then press ENTER.

`Yes:

Confirms that the source is properly displayed. `No:

Displays an error report. Follow the troubleshooting instructions and recheck the source.

4 Use q/wto select one of the following options, and then press ENTER.

`Yes:

Returns to step 2.

`No, Done Checking:

The setup wizard continues to “Remote Mode

Setup”.

Remote Mode Setup

With this step, you can enter remote control codes for the components you want to operate.

1 Use q/wto select one of the following options, and then press ENTER.

`Yes:

Performs the remote control code input. Refer to step 5 of “Looking up for Remote Control Codes” (➔ page 68).

`No, Skip:

Skips this step and continues to “Network

Connection”.

2 When you’re finished, select one of the following options and press ENTER.

`Yes, Done:

The setup wizard continues to “Network

Connection”.

`No, not yet:

You can enter other remote control codes.

Turning On & Basic Operations

Network Connection

This step checks your network connection.

1 Use q/wto select one of the following options, and then press ENTER.

`Yes:

Performs the checkings.

`No, Skip:

Skips this step and terminates the initial setup.

Note

•If you use both wired and wireless network connections, the wireless will take priority.

For further details, see the instruction manual provided with your wireless device.

2 Follow the instructions on screen to perform the network checking.

The checking is complete when the message

“Successfully connected.” appears at the middle of the screen. Press ENTER to terminate the initial setup.

3 If an error message appears, select one of the following options and press ENTER.

`Retry:

Performs the checking again. `No, Do it Later:

Skips this step and terminates the initial setup. The setup wizard goes to “Terminating the Initial Setup”.

Terminating the Initial Setup

This step ends the initial setup process.

1 Press ENTER.

To restart the initial setup, select “Initial Setup” in the “Hardware Setup” menu (➔ page 62).

En-21

Page 20 Page 22
Page 21
Image 21
Onkyo HT-RC460 En-21, Source Connection, Remote Mode Setup, Network Connection, Terminating the Initial Setup
Page 20 Page 22

HT-RC460 specifications

The Onkyo HT-RC460 is a versatile and high-performance AV receiver that enhances the home theater experience. As a part of Onkyo’s renowned line of audio equipment, the HT-RC460 incorporates numerous advanced features and technologies that cater to both audiophiles and casual listeners alike.

One of the standout characteristics of the HT-RC460 is its robust amplification, delivering 7.2 channels of immersive audio. The receiver offers a powerful output of 100 watts per channel, ensuring that you can enjoy your favorite movies, music, and games with exceptional clarity and depth. The 7.2 configuration supports an expansive surround sound experience, allowing users to connect an array of speakers that create an enveloping soundstage.

Equipped with the latest in surround sound technology, the HT-RC460 supports Dolby TrueHD and DTS-HD Master Audio formats, ensuring that you can experience high-resolution audio as it was intended. Additionally, the incorporation of Dolby Surround ensures that legacy audio content can be upmixed to benefit from contemporary surround sound setups, providing a richer listening experience.

The receiver features Onkyo's proprietary AccuEQ room calibration technology. This intuitive system uses a microphone to analyze the acoustics of your room, making automatic adjustments to speaker levels, distances, and equalization. This results in a balanced and optimized audio environment tailored to your specific space, enhancing the overall listening experience.

Connectivity is another strong point of the HT-RC460. It boasts multiple HDMI inputs and outputs, including support for 4K video pass-through, enabling seamless integration with today’s latest video sources. Additionally, it includes USB ports for playback from external devices, along with support for a range of audio formats. Wireless connectivity is facilitated through Bluetooth technology, allowing for easy streaming from smartphones and tablets.

The Onkyo HT-RC460 also incorporates intuitive control options, with an easy-to-navigate user interface and a remote control featuring direct access to frequently used functions. Users can also utilize the Onkyo Controller app for iOS and Android, which provides an additional layer of convenience for managing settings and playback from mobile devices.

In summary, the Onkyo HT-RC460 presents an impressive array of features that make it an excellent choice for anyone looking to elevate their home audio setup. With its powerful amplification, advanced surround sound technologies, and versatile connectivity options, it assures high-quality performance and flexibility for all your audio and video needs. Whether you're watching movies, gaming, or listening to music, the HT-RC460 is designed to deliver an exceptional experience.
Top Page Image Contents