Onkyo HT-RC460 En-58, Listening Mode Preset, 4 “Setup”, Analog/PCM/Digital, Mono/Multiplex Source

Listening Mode Preset

1 2 3 4 “Setup” 5

Main Menu Listening Mode Preset

You can assign a default listening mode to each input source that will be selected automatically when you select each input source. For example, you can set the default listening mode to be used with Dolby Digital input signals. You can select other listening modes during playback, but the mode specified here will be resumed once the AV receiver has been set to standby.

1 Use q/wto select the input source that you want to

set, and then press ENTER. The following menu appears.

5-1. Listening Mode Preset		BD/DVD
Analog/PCM	Last Valid e r
Mono/Multiplex Source	Last Valid
2ch Source	Last Valid
Dolby D/Dolby D Plus/TrueHD	Last Valid
DTS/DTS-ES/DTS-HD	Last Valid
Other Multich Source	Last Valid

Default listening mode for analog and PCM sources.

2 Use q/wto select the signal format that you want to set, and then use er/ to select a listening mode.

Only listening modes that can be used with each input signal format can be selected (➔ pages 35 to 39). The “Last Valid” option means that the listening mode selected last will be used.

The “Straight Decode” option means that straight decoding listening mode (Dolby Digital, DTS, etc.) is selected.

Note

•For the “AM” or “FM” input selector, only “Analog” will be available.

•For the “NET” or “USB” input selector, only “Digital” will be available.

■Analog/PCM/Digital

With this setting, you can specify the listening mode used when an analog (CD, TV, LD, VHS, MD, turntable, radio, cassette, cable, satellite, etc.) or PCM digital (CD, DVD, etc.) audio signal is played.

Note

•For the “AUX”, “EXTRA1”, and “EXTRA2” input selectors, only “PCM” is available.

■Mono/Multiplex Source

With this setting, you can specify the listening mode used when a mono digital audio signal is played (DVD, etc.).

■2ch Source

With this setting, you can specify the listening mode used when 2-channel (2/0) stereo digital sources, such as Dolby Digital or DTS, are played.

■Dolby D/Dolby D Plus/TrueHD

With this setting, you can specify the listening mode used when Dolby Digital or Dolby Digital Plus format digital audio signals are played (DVD, etc.). Specifies the default listening mode for Dolby TrueHD sources, such as Blu-ray or HD DVD (input via HDMI).

En-58

Advanced Operations

■DTS/DTS-ES/DTS-HD

With this setting, you can specify the listening mode used when DTS or DTS-HD High Resolution format digital audio signals are played (DVD, LD, CD, etc.).

Specifies the default listening mode for DTS-HD Master Audio sources, such as Blu-ray or HD DVD (input via HDMI).

■Other Multich Source

Specifies the default listening mode for multichannel PCM sources from HDMI IN such as DVD-Audio, and DSD multichannel sources such as Super Audio CD.