Using the Sleep Timer

With the sleep timer, you can set the AV receiver to turn off automatically after a specified period.

1 Press RECEIVER once followed by SLEEP repeatedly to select the required sleep time.

The sleep time can be set from 90 to 10 minutes in 10 minute steps.

The SLEEP indicator lights on the AV receiver’s display when the sleep timer has been set. The specified sleep time appears for about 5 seconds, then the previous display reappears.

Tip

If you need to cancel the sleep timer, press SLEEP repeatedly until the SLEEP indicator goes off.

To check the time remaining until the AV receiver sleeps, press SLEEP. Note that if you press again on SLEEP as the time being displayed is 10 minutes or less, the sleep timer will go off.

Setting the Display Brightness

You can adjust the brightness of the AV receiver’s display.

1 Press RECEIVER once followed by DIMMER repeatedly to switch between: normal, dim, or dimmer brightness.

Tip

• Alternatively, you can use DIMMER on the AV receiver.

Displaying Source Information

You can display various information about the current input source as follows.

1 Press RECEIVER once followed by DISPLAY repeatedly to cycle through the available information.

Tip

• Alternatively, you can use DISPLAY on the AV receiver.

The following information can be typically displayed.

Input source & volume*1

Listening mode

Signal format*2

Sampling frequency*2

Input signal resolution

Output resolution

*1 When AM or FM radio is used, the band, preset number, and frequency are displayed.

*2 If the input signal is digital, the signal format is displayed. Information is displayed for about three seconds, then the previously displayed information reappears.

Turning On & Basic Operations

Changing the Input Display

When you connect an u-capable Onkyo component, you must configure the input display so that ucan work properly.

This setting can be done only from the front panel.

1 Press TV/CD or GAME.

TV/CD” or “GAME” appears on the AV receiver’s display.

2 Press and hold down the same button (about

3 seconds) to change the input display.

Repeat this step to select the desired input display.

TV/CD: TV/CD DOCK

TAPE

GAME: GAME DOCK

Note

DOCK” can be selected for the “TV/CD” or “GAME” input selector, but not at the same time.

Enter the appropriate remote control code before using the remote controller for the first time (page 70).

En-41

Page 41
Image 41
Onkyo HT-RC460 En-41, Using the Sleep Timer, Setting the Display Brightness, Displaying Source Information

HT-RC460 specifications

The Onkyo HT-RC460 is a versatile and high-performance AV receiver that enhances the home theater experience. As a part of Onkyo’s renowned line of audio equipment, the HT-RC460 incorporates numerous advanced features and technologies that cater to both audiophiles and casual listeners alike.

One of the standout characteristics of the HT-RC460 is its robust amplification, delivering 7.2 channels of immersive audio. The receiver offers a powerful output of 100 watts per channel, ensuring that you can enjoy your favorite movies, music, and games with exceptional clarity and depth. The 7.2 configuration supports an expansive surround sound experience, allowing users to connect an array of speakers that create an enveloping soundstage.

Equipped with the latest in surround sound technology, the HT-RC460 supports Dolby TrueHD and DTS-HD Master Audio formats, ensuring that you can experience high-resolution audio as it was intended. Additionally, the incorporation of Dolby Surround ensures that legacy audio content can be upmixed to benefit from contemporary surround sound setups, providing a richer listening experience.

The receiver features Onkyo's proprietary AccuEQ room calibration technology. This intuitive system uses a microphone to analyze the acoustics of your room, making automatic adjustments to speaker levels, distances, and equalization. This results in a balanced and optimized audio environment tailored to your specific space, enhancing the overall listening experience.

Connectivity is another strong point of the HT-RC460. It boasts multiple HDMI inputs and outputs, including support for 4K video pass-through, enabling seamless integration with today’s latest video sources. Additionally, it includes USB ports for playback from external devices, along with support for a range of audio formats. Wireless connectivity is facilitated through Bluetooth technology, allowing for easy streaming from smartphones and tablets.

The Onkyo HT-RC460 also incorporates intuitive control options, with an easy-to-navigate user interface and a remote control featuring direct access to frequently used functions. Users can also utilize the Onkyo Controller app for iOS and Android, which provides an additional layer of convenience for managing settings and playback from mobile devices.

In summary, the Onkyo HT-RC460 presents an impressive array of features that make it an excellent choice for anyone looking to elevate their home audio setup. With its powerful amplification, advanced surround sound technologies, and versatile connectivity options, it assures high-quality performance and flexibility for all your audio and video needs. Whether you're watching movies, gaming, or listening to music, the HT-RC460 is designed to deliver an exceptional experience.