Using Basic Functions, En-32 | Onkyo HT-RC460 specification

Using Basic Functions

Using the Automatic Speaker Setup

With the supplied calibrated microphone, Audyssey 2EQ® automatically determines the number of speakers connected, their size for purposes of bass management, optimum crossover frequencies to the subwoofer (if present), and distances from the primary listening position. Audyssey 2EQ then removes the distortion caused by room acoustics by capturing room acoustical problems over the listening area in both the frequency and time domain. The result is clear, well-balanced sound for everyone. Audyssey 2EQ can be used with Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (➔ page 54).

Before using this function, connect and position all of your speakers.

Audyssey 2EQ offers two ways of measuring: the “Audyssey Quick Start” and “Audyssey 2EQ Full

Calibration”.

•“Audyssey Quick Start” uses the measurement from one position to perform the speaker setting only.

•“Audyssey 2EQ Full Calibration” uses the measurement from three positions to correct room response in addition to the speaker setting.

The more positions are used in measuring, the better the listening environment will become. We recommend using a measurement from three positions to create the best listening environment.

The Quick Start takes 2 minutes and Full Calibration takes about 10 minutes.

Total measurement time varies depending on the number of speakers.

Measurement procedure

To create a listening environment in your home theater that all listeners will enjoy, Audyssey 2EQ takes measurements at up to three positions within the listening area. Position the microphone at ear height of a seated listener with the microphone tip pointed directly at the ceiling using a tripod. Do not hold the microphone in your hand during measurements as this will produce inaccurate results.

aFirst measurement position

Also referred to as the Main Listening Position, this refers to the most central position where one would normally sit within the listening environment.

Audyssey 2EQ uses the measurements from this position to calculate speaker distance, level, polarity, and the optimum crossover value for the subwoofer.

bSecond measurement position The right side of the listening area.

cThird measurement position The left side of the listening area.

The distances from position a to b and a to c must be at least 1 meter (3.3 ft.).

cab

: Listening area a to c: Listening position

En-32

Turning On & Basic Operations

Note

•Make the room as quiet as possible. Background noise and Radio Frequency Interference (RFI) can disrupt the room measurements. Close windows, televisions, radios, air conditioners, fluorescent lights, home appliances, light dimmers, or other devices. Turn off the cell phone (even if it is not in use) or place it away from all audio electronics.

•The microphone picks up test tones played through each speaker as Audyssey 2EQ Room Correction and Speaker Setup runs.

•Audyssey 2EQ Room Correction and Speaker Setup cannot be performed while a pair of headphones is connected.

HT-RC460 specifications

The Onkyo HT-RC460 is a versatile and high-performance AV receiver that enhances the home theater experience. As a part of Onkyo’s renowned line of audio equipment, the HT-RC460 incorporates numerous advanced features and technologies that cater to both audiophiles and casual listeners alike.

One of the standout characteristics of the HT-RC460 is its robust amplification, delivering 7.2 channels of immersive audio. The receiver offers a powerful output of 100 watts per channel, ensuring that you can enjoy your favorite movies, music, and games with exceptional clarity and depth. The 7.2 configuration supports an expansive surround sound experience, allowing users to connect an array of speakers that create an enveloping soundstage.

Equipped with the latest in surround sound technology, the HT-RC460 supports Dolby TrueHD and DTS-HD Master Audio formats, ensuring that you can experience high-resolution audio as it was intended. Additionally, the incorporation of Dolby Surround ensures that legacy audio content can be upmixed to benefit from contemporary surround sound setups, providing a richer listening experience.

The receiver features Onkyo's proprietary AccuEQ room calibration technology. This intuitive system uses a microphone to analyze the acoustics of your room, making automatic adjustments to speaker levels, distances, and equalization. This results in a balanced and optimized audio environment tailored to your specific space, enhancing the overall listening experience.

Connectivity is another strong point of the HT-RC460. It boasts multiple HDMI inputs and outputs, including support for 4K video pass-through, enabling seamless integration with today’s latest video sources. Additionally, it includes USB ports for playback from external devices, along with support for a range of audio formats. Wireless connectivity is facilitated through Bluetooth technology, allowing for easy streaming from smartphones and tablets.

The Onkyo HT-RC460 also incorporates intuitive control options, with an easy-to-navigate user interface and a remote control featuring direct access to frequently used functions. Users can also utilize the Onkyo Controller app for iOS and Android, which provides an additional layer of convenience for managing settings and playback from mobile devices.

In summary, the Onkyo HT-RC460 presents an impressive array of features that make it an excellent choice for anyone looking to elevate their home audio setup. With its powerful amplification, advanced surround sound technologies, and versatile connectivity options, it assures high-quality performance and flexibility for all your audio and video needs. Whether you're watching movies, gaming, or listening to music, the HT-RC460 is designed to deliver an exceptional experience.

Onkyo HT-RC460 instruction manual Using Basic Functions, En-32, Using the Automatic Speaker Setup

Models: HT-RC460