Onkyo HT-RC460 Controlling Other Components, En-68, Preprogrammed Remote Control Codes, Enter

Controlling Other

Components

You can use the AV receiver’s remote controller to control your other AV components. This section explains how to enter the remote control code for a component that you want to control: DVD, TV, CD, etc.

Preprogrammed Remote Control Codes

The following REMOTE MODE buttons are preprogrammed with remote control codes for controlling the components listed. You do not need to enter a remote control code to control these components.

For details on controlling these components, see the indicated pages.

BD/DVD Onkyo Blu-ray Disc player (➔ page 71) TV/CD Onkyo CD player (➔ page 70)

		Controlling Other Components
		9 If you can control the component, use q/wto select
Looking up for Remote Control Codes
You can look up for an appropriate remote control code		“OK”, and then press ENTER.
		The on-screen menu returns to the “Remote Mode
from the on-screen menu.
		Setup” front screen.
Note		If you cannot control the component, use q/wto
• This can only be carried out using the on-screen menu.
		select “Try Next Code” and press ENTER.
1	Press RECEIVER followed by HOME.	The next code is displayed.
2	Use e/rto select “Setup”, and then press ENTER.
3	Use q/wto select “Remote Controller Setup”, and
	then press ENTER.
4	Use q/wto select “Remote Mode Setup”, and then
	press ENTER.
5	Use q/wto select a remote mode, and then press
	ENTER.
	The menu of category selection appears.
6	Use q/wto select a category, and then press
	ENTER.
	The keyboard screen for brand name input appears.
7	Use q/w/e/rto select a character, and then press
	ENTER.
	Repeat this step for the first three characters of the
	brand name.
	When you have entered the 3rd character, select
	“Search” and press ENTER.
	A list of brand names is retrieved.
	If the desired brand name is not found:
	Use rto select “Not Listed”, and then press
	ENTER.
	The keyboard screen for brand name input appears.
8	Use q/wto select a brand, and then press ENTER.
	A remote control code with its instructions are
	displayed. Follow the procedure.

En-68