Onkyo HT-RC460 instruction manual En-48, Input/Output Assign, 4 “Setup”, Monitor Out, Resolution

Input/Output Assign

1 2 3 4 “Setup” 5

Main Menu Input/Output Assign

Monitor Out

On the “Monitor Out” settings, you can select whether or not to have the video sources’ images output through the HDMI output.

If you connect your TV to HDMI output, “Monitor Out” setting is automatically set and composite video and component video sources are upconverted* and output.

Composite video,
component video	HDMI
	IN
	OUT
Composite video,	HDMI
component video

Note

•See “Video Connection Formats” (➔ page 83) for charts showing how the “Monitor Out” and “Resolution” settings affect the video signal flow through the AV receiver.

■Monitor Out

`Main:

Select this if your TV is connected to HDMI OUT MAIN.

`Sub:

Select this if your TV is connected to HDMI OUT

SUB.

`Both:

Select this if your TVs are connected to HDMI OUT MAIN and HDMI OUT SUB. Video signals are

output from both HDMI outputs at the resolution supported by both TVs.

■Resolution

`Through:

Select this to pass video through the AV receiver at the same resolution and with no conversion.

`Auto:

Select this to have the AV receiver automatically convert video at resolutions supported by your TV.

`480p, 720p, 1080i, 1080p:

Select the desired output resolution.

`1080p/24:

Select this for 1080p output at 24 frames per second.

`4K Upscaling:

Select this for an output resolution four times that of 1080p. Depending on the resolution supported by your TV, it will result in either 3840 × 2160 or 4096 × 2160 pixels.

You can specify the output resolution for the HDMI OUT MAIN and have the AV receiver upconvert the picture resolution as necessary to match the resolution supported by your TV.

Tip

•You can see the picture by pressing ENTER to check the “Resolution” setting (excluding NET input source).

Note

•Depending on the incoming video signal, the video playback may not be smooth or the vertical resolution may be lowered. In this case select anything other than “1080p/24”.

•With some TVs, there may be no picture when this setting is set to “4K Upscaling”.

•If the “Monitor Out” setting is set to “Sub”, this setting is fixed to “Through”.

•If the “Monitor Out” setting is set to “Both”, this setting is fixed to “Auto”.

En-48

Advanced Operations

HDMI Input

If you connect a video component to an HDMI input, you must assign that input to an input selector. For example, if you connect your Blu-ray Disc/DVD player to HDMI IN 2, you must assign “HDMI2” to the “BD/DVD” input selector.

If you’ve connected your TV to the AV receiver with an HDMI cable, composite video and component video sources can be upconverted* and output by the HDMI output. You can set this for each input selector by selecting the “- - - - -” option. See “Video Connection Formats” for more information on video signal flow and upconversion (➔ page 83).

Composite video,
component video	HDMI
	IN
	OUT
Composite video,	HDMI
component video
Here are the default assignments.
Input selector	Default assignment
BD/DVD	HDMI1
CBL/SAT	HDMI2
GAME	HDMI3
PC	HDMI4
AUX	FRONT (Fixed)
TV/CD	- - - - -
EXTRA1	- - - - -
EXTRA2	- - - - -