Update Procedure

1 Press RECEIVER followed by HOME on the remote controller.

The Home menu appears on the TV screen.

2 Select “Firmware Update” and press ENTER. Note that the “Firmware Update” option will be grayed out for a short while after the AV receiver is turned on. Please wait until it becomes operable.

3 Select “Update via NET” and press ENTER.

Note that this option will not be available if there is no firmware file newer than the currently installed version.

4 Select “Update” and press ENTER. The update process will begin.

During the update process, the on-screen display may disappear depending on the updated program. When this occurs, you can still view the update progress on the AV receiver’s display. The on-screen display will reappear after the update is complete, and upon turning the AV receiver off and on again.

5 The message “Completed!” appears on the AV receiver’s display, indicating that the update has been completed.

6 Turn off the AV receiver using 8ON/STANDBY on the front panel.

Do not use 8RECEIVER on the remote controller. Once turned off, the AV receiver will automatically turn on again.

Congratulations! You now have the latest firmware installed on your Onkyo AV receiver.

Troubleshooting

Case 1:

If an error occurs, “Error!! *-** is displayed on the AV receiver’s display. (Alpha-numeric characters on the front display are denoted by asterisks.) Refer to the following table and take appropriate action.

Errors during an update via network

Error Code

Description

*-10,*-20

The Ethernet cable was not detected.

 

Reconnect the cable properly.

 

 

*-11,*-13,*-21,

Internet connection error.

*-28

Check the following items:

 

• Make sure the IP address, subnet mask,

 

gateway address, and DNS server are

 

configured properly.

 

• Make sure the router is turned on.

 

• Make sure the AV receiver and the router are

 

connected with an Ethernet cable.

 

• Make sure your router is configured properly.

 

See the instruction manual of the router.

 

• If your network allows only one client

 

connection and there is any other device

 

already connected, the AV receiver will not be

 

able to access the network. Consult your

 

Internet Service Provider (ISP).

 

• If your modem does not function as a router,

 

you will need a router. Depending on your

 

network, you may need to configure the proxy

 

server if necessary. See the document

 

provided by your ISP. If you are still unable to

 

access the Internet, the DNS or proxy server

 

may be temporarily down. Contact your ISP.

 

 

Others

Retry the update procedure from the beginning.

 

If the error persists, please contact Onkyo

 

Support (page 82) and provide the error

 

code.

 

 

Case 2:

If an error occurs during the update process, disconnect then reconnect the AC power cord and try again.

En-80

Appendix

Case 3:

If you do not have an Internet connection to the network, please contact Onkyo Support (page 82).

Page 80
Image 80
Onkyo HT-RC460 instruction manual En-80, Update Procedure, Troubleshooting, Errors during an update via network

HT-RC460 specifications

The Onkyo HT-RC460 is a versatile and high-performance AV receiver that enhances the home theater experience. As a part of Onkyo’s renowned line of audio equipment, the HT-RC460 incorporates numerous advanced features and technologies that cater to both audiophiles and casual listeners alike.

One of the standout characteristics of the HT-RC460 is its robust amplification, delivering 7.2 channels of immersive audio. The receiver offers a powerful output of 100 watts per channel, ensuring that you can enjoy your favorite movies, music, and games with exceptional clarity and depth. The 7.2 configuration supports an expansive surround sound experience, allowing users to connect an array of speakers that create an enveloping soundstage.

Equipped with the latest in surround sound technology, the HT-RC460 supports Dolby TrueHD and DTS-HD Master Audio formats, ensuring that you can experience high-resolution audio as it was intended. Additionally, the incorporation of Dolby Surround ensures that legacy audio content can be upmixed to benefit from contemporary surround sound setups, providing a richer listening experience.

The receiver features Onkyo's proprietary AccuEQ room calibration technology. This intuitive system uses a microphone to analyze the acoustics of your room, making automatic adjustments to speaker levels, distances, and equalization. This results in a balanced and optimized audio environment tailored to your specific space, enhancing the overall listening experience.

Connectivity is another strong point of the HT-RC460. It boasts multiple HDMI inputs and outputs, including support for 4K video pass-through, enabling seamless integration with today’s latest video sources. Additionally, it includes USB ports for playback from external devices, along with support for a range of audio formats. Wireless connectivity is facilitated through Bluetooth technology, allowing for easy streaming from smartphones and tablets.

The Onkyo HT-RC460 also incorporates intuitive control options, with an easy-to-navigate user interface and a remote control featuring direct access to frequently used functions. Users can also utilize the Onkyo Controller app for iOS and Android, which provides an additional layer of convenience for managing settings and playback from mobile devices.

In summary, the Onkyo HT-RC460 presents an impressive array of features that make it an excellent choice for anyone looking to elevate their home audio setup. With its powerful amplification, advanced surround sound technologies, and versatile connectivity options, it assures high-quality performance and flexibility for all your audio and video needs. Whether you're watching movies, gaming, or listening to music, the HT-RC460 is designed to deliver an exceptional experience.