J111: Fan Connector for Barebone (reserved)
214
113
Pin | Signal | Pin | Signal |
1 | CPUFAN0_TACH | 2 | CPUFAN2_TACH |
3 | CPUFAN1_TACH | 4 | CPUFAN3_TACH |
5 | SYSFAN0_TACH | 6 | CPU_FAN_TACH2 |
7 | SYSFAN1_TACH | 8 | SYSFAN5_TACH |
9 | NC | 10 | NC |
11 | GND | 12 | KEY |
13 | GND | 14 | CPUFAN0_PWM |
JP1: SAS Disable Jumper (for S2912WG2NR only)
1
Open: Enable SAS Controller (Default)
1
Closed: Disable SAS Controller
JP2: OPMA Card Supporting Select Jumper
1
Open: Use other OPMA card
1
Closed: Use TYAN OPMA card (Default)
JP3: Clear CMOS Jumper
1 
3
Normal
(Default)
1 
3
Clear
Use this jumper when you have forgotten your system/setup password or need to clear the system BIOS settings.
How to clear the CMOS data
-Power off system and disconnect the power supply from the AC source
-Use jumper cap to close Pin 2 and 3 for several seconds to Clear CMOS
-Replace jumper cap to close Pin 1 and 2 Reconnect the power supply to the AC source
-Power on system
20
http://www.tyan.com