Tyan Computer S2912 warranty Auto DQS Training, Multiprocessor Specification, ECC Error Checking

Auto DQS Training

[Disabled]: Do DQS training on every cold boot.

[Enabled]: Train DQS only when the installed DIMMs are changed.

Options: Enabled / Disabled

Multiprocessor Specification

It allows you to configure the MP specification revision level. Some operating systems will require 1.1 for compatibility reasons.

Options: 1.4 / 1.1

3.4.1.1 ECC Options Sub-Menu

ECC Mode

Set the level of ECC protection. If User is selected, individual ECC options may be changed. Other options besides Disabled serve as presets. For super mode, all of memory is scrubbed every 8 hours.

Options: Disabled / Enabled

ECC Error Checking

Enable the DRAM controller to read/write ECC check-bits on the DIMMs and it allows the north bridge to check and correct ECC errors on the DRAM bus during normal CPU or bus master read requests.

Options: Disabled / Enabled

DCache ECC Scrub Control

Sets the rate of background scrubbing for the DCache.

41

http://www.tyan.com