COM2 (J95): COM2 Header
Use these pin definitions to connect a port to COM2.
*TYAN does not provide cable for this header. It is designed for OEM use only.
2 | 10 |
|
|
|
|
|
|
|
| Pin | Signal | Pin | Signal |
|
|
| 1 | DCD | 2 | DSR |
|
|
| 3 | RXD | 4 | RTS |
|
| |||||
1 | 9 |
|
|
|
|
|
5 | TXD | 6 | CTS | |||
|
|
| 7 | DTR | 8 | RI |
|
|
| 9 | GND | 10 | NA |
J113: LCD Model Pin Header
26
1 5
Pin | Signal | Pin | Signal |
1 | +5V | 2 | SIN |
3 | Key | 4 | GND- |
5 | +5Vsb | 6 | SOUT |
J15: TYAN Front Panel 2 for Barebone (reserved)
111
12 2
Pin | Signal | Pin | Signal |
1 | VDD_3P3_DUAL | 2 | P0_LED |
3 | VDD_3P3_DUAL | 4 | P1_LED |
5 | VDD_3P3_DUAL | 6 | M_LAN_ACT_L |
7 | FP_ID_LED_PW | 8 | GND |
9 | IDLED_IN | 10 | GND |
11 | NC | 12 | KEY |
FP_ID_LED_PW: Use to turn on and turn off ID LED
IDLED_IN: Use to help identify a system for servicing when it is installed within a high density rack or cabinet that is populated with several other similar systems. The first press of the ID Switch will turn on the LED, and the second press will turn off ID LED.
18
http://www.tyan.com