2.15 Frequently Asked Questions (FAQ)
Q: My system sometimes becomes unstable. How should I check the system?
A:The first thing to do is to check and see if you have any device conflicts related to the IRQ, or DMA. If you are using Microsoft Windows, the Control Panel is a good place to start investigating the conflict. Please consult your operating system documentation for details. Secondly, check to make sure you are using an ATX 2.01 or better power supply that has a minimum of 30A on the +5V power line. Lastly, make sure the motherboard is receiving adequete cooling.
Q:I have a question about memory compatibility; what memory will work on my motherboard?
A:Memory compatibility information can be found on Tyan’s website at: http://www.tyan.com
Q:I have a question about CPU compatibility; what CPU will work on my motherboard?
A:CPU compatibility information can be found on Tyan’s website at: http://www.tyan.com
Q: Where can I get additional accessories for my Tyan motherboard?*
A:You can purchase additional accessories such as USB cables*, as well as other
Q: Where do I get pinout information for my motherboard?
A: Pinouts of certain headers are available on the Tyan website: http://www.tyan.com
Q: My motherboard is dead, how do I return it?
A:Contact the place of purchase or your distributor for assistance to return the motherboard for service. RMA issues will not be handled via
Q: How do I upgrade my BIOS?
A:Check the section about the Flash Utility (see p. 46) for information on upgrading your BIOS. BIOS update files, flash utilities, and instructions on how to install them are also available from the Tyan website at: http://www.tyan.com
Q: Why do I get a “CMOS checksum invalid” error message during POST?
A:If you get the above error message or “Invalid configuration, run Setup” message, it is an indication that the CMOS battery needs to be changed. Contact your dealer for assistance. Once you’ve replaced your battery or flashed your BIOS, don’t forget to check the Clear CMOS section (see p.12) so that you can reset your CMOS.
*If your chassis supports frontside USB connectors, it will usually come with the necessary cables. Check that your chassis is frontside USB capable. Please check with your chassis vendor for details. Tyan does not provide frontside USB cables.
30
http://www.tyan.com