Tyan Computer S2460 DMA Channel, PCI Configuration, Graphics Aperture, Serr Signal Condition

(advanced setup, continued)

	FORMAT:	[option]
DMA Channel	OPTIONS:	DMA1	These options appear
		DMA3	when parallel port is set to
			‘Enabled’.
PCI Configuration	Discussed on p. 40

3.2-A. Chipset Configuration screen

Options related to the graphics interface can be altered through this screen.

	FORMAT:	[option]
	OPTIONS:	32MB	Sets the size of the mem-
		64MB	ory area reserved for stor-
Graphics Aperture		128MB	age of graphics data
		256MB	structures used by the
		512MB	AGP.
		1GB
		None
	FORMAT:	[option]
	OPTIONS:	None	ERR signals not output
			under any condition.
		Single bit	ERR signal output for a
SERR Signal Condition			single bit
		Multiple bits	ERR signal output for
			multiple bits
		Both	ERR signal output for
			both instances.
	FORMAT:	[option]
	OPTIONS:	Disabled	No error checking.
		EC (single bit)	Error checking & status
			report enabled. Data not
			corrected.
		ECC (multiple bits)	Error checking & status
ECC Config			report enabled. Data is
			corrected.
		ECC Scrub	Error checking & status
			report enabled. Data is
			corrected. Memory con-
			tents are corrected
			(scrubbed) after all reads
			with errors.

38

http://www.tyan.com