2.1System Assembly
When installing a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter.
Opening the Cover
CAUTION:
•Static electricity can destroy electronic devices. W henever you handle an option outside of its protective packaging, first discharge any static electricity from your body by touching a protective grounding device or unpainted metal on the rear panel of the system before unplugging the power cord.
•Before you install any option, turn all power switches off. Unplug all power cords from the system and all peripherals. Leaving the power on can cause serious damage to your system.
•If the system is mounted on an equipment rack, remove the system from the rack and take it to a service area. Do not attempt to disassemble the system while it is still in the equipment rack.
1.Remove two screws from the back of the system. Pull the cover backward to detach it.
2.To replace the cover, slide the cover forward and replace the two screws.
WARNING: Before you remove or install these modules, make sure that the system is not turned on or connected to AC power.
Installing the CPU
Your system supports Socket 478 Intel Pentium 4 processor up to 3.06 GHz.
1.Remove the cabinet cover (see previous section).
2.Remove the air duct from the chassis by unfastening three side screws.
13
http://www.TYAN.com