Tyan Computer B2094T15 warranty Rack Mounting, Cabinet Slides and Ears

Page 18

2.Locate the PCI slot.

3.Firmly press the riser card’s edge connector into the PCI slot.

4.Replace the cabinet cover.

2.2Rack Mounting

The slide rackmount kit provides a sliding rackmount solution for the product . Slides enable optimal serviceability of the server from the front of the rack, including accessibility to the rear of the server for cabling and the capability for top cover removal. It is compatible with most 19” EIA standard 4 post racks with non -threaded holes.

After unpacking the shipping carton, you should find these standard items:

•2 moun ting ears

•2 rack slides (inner and outer slides)

•4 post slide mount adapters

•hex screws (+) and hex nuts (for outer slides)

•hex screws (for slide mount adapter – dark colored)

Inspect all the items. If any item is damaged or missing, notify your dealer immediately.

Cabinet Slides and Ears

1.Attach the mounting ears to the side near the front of the cabinet. Then secure each with two screws.

18

http://www.TYAN.com

Image 18

Contents Transport GS10 B2094T15 Table of Contents Installing Software Drivers Safety Precautions Introduction Before You BeginUnpacking Product Description Specifications MemorySystem View Front ViewRear View Page Cabinet Installation System Assembly Flowchart System Assembly Installing the CPUOpening the Cover Page Installing System Memory Installing a Hard Disk Drive Installing a Riser Card Rack Mounting Cabinet Slides and EarsPage Cabinet into the Rack Locking TabSetting Up the System System RequirementsPlacing the System Making the Connection Configuring the System Using the LCD ConsoleBefore You Begin Setting the Configuration For LinuxFor Windows Rebooting the System Powering Down the SystemSetting Up With the Web Browser Linux RedHat Installation Notes First possibilityPage Configuring the System Bios Setup ProgramStarting Bios Setup Main Menu Advanced MenuCPU Temperature System Temperature Power Menu Security MenuBoot Menu Exit MenuJumper Settings Jumper Definition Setting DescriptionInstalling Software Drivers Installation Instructions for WindowsInstallation Instructions for Linux RedHat LCD DriverRAID Redundant Arrays of Inexpensive Disks Driver Driver CD \Promise\20276\Linux directoryPress Ctrl+Alt+F7 and click Exit to exit the installation Page Page Expanding the System Opening the CoverInstalling an Expansion Card Adding a Secondary Hard Disk Drive Secondary IDE Connector With a Secondary Hard Disk Drive Installed Adding a CD Drive for test purposeWithout a Secondary Hard Disk Drive Installed Using RAID About RAIDCreating an Array FastBuild Utility main menu appears on the screenCreating an Array for Performance RAID Creating a Security Array RAID 1 wi th New DrivesViewing Drive Assignments ChannelID Drive Model CapacityMB AssignmentChanging the Array Deleting an ArrayRebuilding a Mirrored Array Highlight the array with Critical status and press Enter Appendix DanishTechnical Support FrenchDocument # D1532-100