Tyan Computer B2094T15 warranty Secondary IDE Connector

Page 44

Secondary IDE Connector

3.Secure the hard disk drive to the bracket with four bottom screws.

4.Fit the bracket with the hard disk drive back into place and secure with one screw.

5.Connect one end of the data cable to the secondary IDE connector (see figure above) and the other end to the rear of the hard disk drive.

NOTE: Connect the data cable to the secondary RAID IDE connector if using RAID disk drive.

6.Connect the power cord to the rear of the hard disk drive.

7.You can create RAID for the hard disk drives (see Chapter 7 for information).

44

http://www.TYAN.com

Image 44

Contents Transport GS10 B2094T15 Table of Contents Installing Software Drivers Safety Precautions Unpacking IntroductionBefore You Begin Product Description Specifications MemorySystem View Front ViewRear View Page Cabinet Installation System Assembly Flowchart Opening the Cover System AssemblyInstalling the CPU Page Installing System Memory Installing a Hard Disk Drive Installing a Riser Card Rack Mounting Cabinet Slides and EarsPage Cabinet into the Rack Locking TabPlacing the System Setting Up the SystemSystem Requirements Making the Connection Before You Begin Configuring the SystemUsing the LCD Console Setting the Configuration For LinuxFor Windows Setting Up With the Web Browser Rebooting the SystemPowering Down the System Linux RedHat Installation Notes First possibilityPage Starting Bios Setup Configuring the SystemBios Setup Program Main Menu Advanced MenuCPU Temperature System Temperature Power Menu Security MenuBoot Menu Exit MenuJumper Settings Jumper Definition Setting DescriptionInstalling Software Drivers Installation Instructions for WindowsInstallation Instructions for Linux RedHat LCD DriverRAID Redundant Arrays of Inexpensive Disks Driver Driver CD \Promise\20276\Linux directoryPress Ctrl+Alt+F7 and click Exit to exit the installation Page Page Expanding the System Opening the CoverInstalling an Expansion Card Adding a Secondary Hard Disk Drive Secondary IDE Connector With a Secondary Hard Disk Drive Installed Adding a CD Drive for test purposeWithout a Secondary Hard Disk Drive Installed Using RAID About RAIDCreating an Array FastBuild Utility main menu appears on the screenCreating an Array for Performance RAID Creating a Security Array RAID 1 wi th New DrivesViewing Drive Assignments ChannelID Drive Model CapacityMB AssignmentRebuilding a Mirrored Array Changing the ArrayDeleting an Array Highlight the array with Critical status and press Enter Appendix DanishTechnical Support FrenchDocument # D1532-100