COM Port Addre ss if enabled, will use a port on the system board.
Baud Rate enables the specified baud rate.
Console Type enables the specified console type.
Flow Control enables Flow Control.
Console Connection indicates whether the console is connected directly to the system or uses a modem to connect.
Continue C.R. After POST enables Console Redirection after operating system has loaded.
Security Menu
The Security menu contains the security settings that protect your system against unauthorized use.
Supervisor/U ser Password indicates if a Supervisor or User password exists.
Set Supervisor/User Password sets the Supervisor/User password. The Supervisor can access the Setup program and boot the system while the User can only boot the system. Passwords are not case sensitive.
Diskette Access sets the accessibility of the floppy disk drive.
Fixed Disk Boot Sector protect the boot sector against any changed.
CAUTION: Set this item to disabled before installing an operating system, running Fdisk or Format program, or when
Virus Check Reminder displays the virus check reminder message during system boot up.
System Backup Reminder displays the system back up reminder message during system boot up.
Password on Boot determines if the system will request a password when starting up.
Power Menu
The Power menu contains the power management settings that help save system power.
Enable ACPI enables or disables ACPI (Advanced Configuration Power Interface) – a power management standard used by the operating system.
Power Saving sets the power saving mode.
Standby Timeout sets the timer for the system to enter Standby mode when it has been idle for the set time period.
Resume On Modem Ring sets if the system will wake up from Standby mode when an incoming call occurs.
Resume On Time/Resume Time allows the system to wake up at a specific time.
32
http://www.TYAN.com