For Windows
1.Press the 
button according to the number of times specified on the following table, and you will see the corresponding prompt.
KEY PRESS | PROMPT | FUNCTION | |
|
|
| |
| NIC1 IPADDR | Enter the IP address assigned to NIC1 | |
once (1) | Change? |
| |
|
|
| |
| NIC1 NETMASK | Enter the netmask of your network to NIC1 | |
twice (2) | Change? |
| |
|
|
| |
| NIC1 GATEWAY | Enter IP address of the gateway for your network | |
thrice (3) | Change? |
| |
|
|
| |
| NIC1 DNS1 | Enter the primary DNS address assigned to the | |
four (4) times | Change? | NIC1 | |
|
|
| |
| NIC1 DNS2 | Enter the secondary DNS address assigned to the | |
five (5) times | Change? | NIC1 | |
|
|
| |
| Reboot | Allows you to reboot the server | |
six (6) times | Server? |
| |
|
|
| |
| Shutdown | Allows you to shutdown the server | |
seven (7) times | Server? |
| |
|
|
| |
| NIC2 IPADDR | Enter IP address assigned to the NIC2 | |
eight (8) times | Change? |
| |
|
|
| |
| NIC2 NETMASK | Enter netmask address assigned to the NIC2 | |
nine (9) times | Change? |
| |
|
|
| |
| NIC2 GATEWAY | Enter gateway address assigned to the NIC2 | |
ten (10) times | Change? |
| |
|
|
| |
| NIC2 DNS1 | Enter primary DNS address assigned to the NIC2 | |
eleven (11) times | Change? |
| |
|
|
| |
| NIC2 DNS2 | Enter secondary DNS address assigned to the NIC2 | |
twelve (12) times | Change? |
| |
|
|
|
2.Press the 
button to confirm selection of the option displayed.
3.Use the 
button to increase or 
button to decrease the value .
4.Then, press the 
button to accept the data entered and return to the main screen.
NOTE: If you press the 
button to cancel the configuration, you must go through the entry process again.
25
http://www.TYAN.com