b)Connecting The 6 Pin Mini Din Connector
Using a suitable mating connector the pins of the integrated connector should be wired as follows:
Connecting To The Integrated 6 Pin Connector
Pin Out of Integrated
Connector
Pin 2 should be connected to the Positive of the power source.
Pin 6 should be connected to the Negative (Ground) of the power source.
Pin 3 provides the signal output and should be connected to the positive terminal of the display, data acquisition system or voltmeter.
Pin 1 is the signal negative (ground) and should be connected to the negative (Ground) terminal of the display, data acquisition system or voltmeter.
Pin 4 provides the input signal and should be connected to the positive terminal of the voltage source. The
Pin 5 is the input signal negative (ground) and should be connected to the negative (Ground) terminal of the voltage source.
Caution: Avoid high voltage static discharges to the input signal connection. Do not short the input/output signal wires or allow them to contact the power wires at any time. DAMAGE WILL RESULT!