Omega OMB-DAQBOARD-500 manual Analog Input Triggering/Clocking, Specifications

	Note: Specifications subject to change without notice.
Signal to Noise
and Distortion:	S/(N+D) 73 dB min. @ gain = 1
Total Harmonic
Distortion:	80 dB (typical) @ gain = 1, measured to 5th harmonic
Full Power
Bandwidth:	1 MHz
Input Impedance
Shunt Res. to
Ground:	10 M ohm
Shunt
Capacitance:	28 pf
Overvoltage
Protection:	±25 V
Acceptable
Operating Limit:	Signal Plus Common Mode: ±12 V
Gain/Channel
Selection:	176 element

Analog Input Triggering/Clocking

Clock Sources:	o on-board programmable pacer
	o user defined external TTL
External Clock	o 5us max
Input Latency:

Trigger Sources

osoftware command o External (TTL)

o software Analog as follows:

•above level

•below level

•rising above level

•falling below level

•inside window

•outside window

Stop Sources

osoftware command

osoftware Analog as follows:

•above level

•below level

•rising above level

•falling below level

•inside window

•outside window

•scan count

External TTL
Trigger Latency:	5us max
Software Analog
Trigger Latency	One scan period max

6-2 Specifications 947294 DaqBoard/500 Series