NETGEAR SC101 manual Command utfull getpart, Fixing Corrupted Characters

Page 25

If a CLI is inside of a Windows pop-up, you can close it by typing exit then RETURN. It doesn't do any harm to leave it open, if you might want it later.

Command: ut_full getpart

You can use this command to see if there are corrupted characters.

In the following screen shot, see the last row. It is a response to an ut_full getpart command, and shows the numbers that can become corrupted. Here, in the middle of the row, are the correct numbers: 02 00 02 or 01 00 01.

If a mirrored drive is broken, in place of 02 00 02, the numbers are 02 00 01 (shown).

If a non-mirrored drive is broken, the numbers are 01 00 01 (shown).

Fixing Corrupted Characters

This involves using a special SC101 command called ut_full. NOTE: This is the only situation NETGEAR recommends using this utility. Do not use it to change attributes of partitions that are working correctly. This might destroy data!

You will need to use the ut_full getpart, ut_full listall, and ut_full newattri commands.

1.Download the file below to the SC101 directory (If you installed to the default location, C:\Program Files\NETGEAR\SC101 Manager Utility\) 37.3 KB

2.Unzip the file. The ut_full.exe file appears in the directory.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Netgear SC101 Revised Troubleshooting Guide Page Troubleshooting Tips Viewing and Accessing DrivesWindows Disk Management Unallocated Partitions Page Page Page Cannot See Partition Old Firmware Problem Click Attach Drive If a partition has never been seen on a particular computerPrerequisites Cannot Create a MirrorIii. Click Attach Drive Check LED Lights URL Link Hardware LED IndicatorsLink or FritzBox Routers Light Light State What It Means What You Should DoDefragmenting LAN ConnectionHard Disk Problem Action Hard Disk Problems and Drive ErrorsSolution SCM InstallationTo customize font settings SCM SoftwareError Message Meaning and Action Error MessagesNo Central Storage Action Device was Found No Central Storage Device was Found in SmartWizardNo Central Storage Device was Found Action Symptoms SmartSync Pro Activation ErrorCause Symptom Error Drive attachment failed when Attach Partition FailsSystem Requirements About the SC101Heat and the SC101 How does heat affect the Storage Central performance? SC101 PerformanceNew Technology File System Ntfs Self-certifying File System SFSSAN and Network Attached Storage NAS Using CLI Commands SC101 Command Line Interface CLI for Advanced UsersType cd c\Program Files\NETGEAR\SC101 Type ut listall, then EnterUnique Name Fixing Corrupted Characters Command utfull getpart00 00 00 00 00 00 00 00 01 00 01 00 00 00 0A 00 00 00 00 00 00 00 00 02 00 02 00 00 00 0AType sc config ftsata2 start= disabled To disable the Promise drivers and install the SCM UtilityRemoving an Unusable Drive with ut.exe Data recovery with SFSExtract.exeTo remove an unusable drive from the SC101 Type cd C\Program Files\NETGEAR\SC101 Manager UtilityType SFSExtract Single drive target
Related manuals
Manual 2 pages 44.73 Kb Manual 54 pages 17.75 Kb

SC101 specifications

The NETGEAR SC101 is a network-attached storage (NAS) device designed to simplify data storage and sharing within a home or small office environment. It provides an efficient solution for users looking to centralize their files, making them accessible from multiple devices connected to the same network.

One of the main features of the SC101 is its user-friendly interface that allows for easy setup and administration. It supports Windows, Mac OS, and Linux operating systems, ensuring compatibility with a wide range of devices. This versatility makes it an attractive choice for households and small businesses that utilize different systems. The SC101 also implements a simple drag-and-drop file management system, enabling users to effortlessly store and retrieve their data.

The device is built with two bays, accommodating standard hard drives that can be customized based on the user's storage needs. This flexibility enables users to start with a single drive and expand their storage capabilities as required. The SC101 supports both RAID 0 and RAID 1 configurations, allowing for a balance between performance and data redundancy. RAID 0 offers enhanced speed, while RAID 1 mirrors data, providing a level of protection against drive failures.

Connectivity is another highlight of the SC101. It features an Ethernet port that connects to the network, with support for various protocols including TCP/IP and UDP. Users can access their files from any computer on the network or even remotely, providing enhanced accessibility for team collaboration or personal use. The built-in web-based management interface also enables users to manage user accounts and permissions, ensuring security and controlled access to data.

In terms of performance, the SC101 utilizes a 480 MHz processor and 64 MB of RAM, which helps in delivering satisfactory performance for file transfers. While it may not compete with modern storage solutions or high-speed drives, it facilitates efficient data retrieval suitable for home and office environments.

Overall, the NETGEAR SC101 is a practical NAS solution that combines central file storage, easy management, and essential data protection features. Its compatibility with various operating systems, support for RAID configurations, and user-friendly setup make it a solid choice for users seeking to enhance their data storage capabilities without the complexity often associated with high-end NAS systems.
Top Page Image Contents